Phonic WMSYS4 Dual Channel UHF Wireless System for Active Speakers
No longer available at zZounds


zZounds Gear Experts Say...
Stand-alone UHF dual channel wireless receiver, working with any active speakers; 16 user-selectable frequencies
Overview
WMSYS4 Stereo Wireless System for Active Speakers - The Ponic WMSYS4 is a Wireless system for saving the audio cables between your mixer and active speakers.
Features
Wireless system for saving the audio cables between your mixer and active speakers
Stand-alone UHF wireless receiver, working with any active speakers
RF carrier frequency range: 614-870MHz
Wireless system for saving the audio cables between your mixer and active speakers
Stand-alone UHF wireless receiver, working with any active speakers
12VDC external power supply (country dependent)
16 user-selectable frequencies
RF carrier frequency range: 614-870MHz
Operating range: 210 ft. (70m, environment dependent)
Indicators for power on, AF and RF
Antenna: external, threaded connector
Audio output connectors: XLR out
Internal squelch and mute circuit mode can resist extraneous noise
M6, M8 and M10 screws and velcro strip included to attach receiver unit to any active speakers
Features
Wireless system for saving the audio cables between your mixer and active speakers
Stand-alone UHF wireless receiver, working with any active speakers
RF carrier frequency range: 614-870MHz
Wireless system for saving the audio cables between your mixer and active speakers
Stand-alone UHF wireless receiver, working with any active speakers
12VDC external power supply (country dependent)
16 user-selectable frequencies
RF carrier frequency range: 614-870MHz
Operating range: 210 ft. (70m, environment dependent)
Indicators for power on, AF and RF
Antenna: external, threaded connector
Audio output connectors: XLR out
Internal squelch and mute circuit mode can resist extraneous noise
M6, M8 and M10 screws and velcro strip included to attach receiver unit to any active speakers
Specs
System Components
1x WM70 dual channel transmitter
1x WM400-L left channel receiver
1x WM400-R right channel receiver
3x power supplies for WM70, WM400-L and WM400-R
M6, M8, M10 screws
1x WM70 dual channel transmitter
1x WM400-L left channel receiver
1x WM400-R right channel receiver
3x power supplies for WM70, WM400-L and WM400-R
M6, M8, M10 screws
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Reviews
Reviewers gave this product an overall rating of 4.5 out of 5 stars.
(9 ratings)
Submitted December 7, 2008 by a customer from yahoo.com
"If you have a need to do a remote broadcast, run wireless speakers or have satellite speakers in addition to your main system, t"
Verified Customer
zZounds has verified that this reviewer made a purchase from us.
I have been very happy with the product. I would replace it if anything happened. I have used other products, and this does the job just as well, with an easier set up. I like the service it allows me to provide for some weddings and DJ gigs. What I like least is the VU level difference. You need a much hotter signal going into the transmitter than what you would normally run to a powered speaker. YOU HAVE TO GO DIRECTLY FROM YOUR MIXER/PLAYER to get an adequate signal level. If you go from the mixer to the speaker and chain back to the unti the level will not be enough to get a signal. Thats the biggest downfall of the unit, but again, testing ahead of time and using common sense in your setup will take care of that for you.
Sound
The sound is fine as long as you are not too far (within 100 feet is great) and dont have interferrence issues. I have run into situations where there was noise from a battery back-up emergency lighting system, but if you use common sencse in the set up you can avoid potential problems. The levels drop a bit compared to a direct connect, but you can easily compensate. Again, use common sense in the set up and test before hand.
Features
The features are pretty much meat and potatos. You can run 1 0r 2 speakers mono or stereo, so you have flexibility. The secret is to run your output mono and split the signal so left goes into the unit and right goes to your direct connect speakers. Adjust… read more your direct connect speakers to a lower volume to compensate for the level cut on the braodcast of the unit.
Ease of Use
Once again, its easy to use,. just test out the relationship of sound levels between hard connect and the broadcast level. You'll need to have a strong signal going into the Phonic transmitter. MAKE SURE YOU USE THE CORRECT POWER ADAPTER!! The transmitter and receivers use different power.
Quality
A little more durability for the transmitter would be good,. but as long as you take care of it,. you'll be fine. I carry mine in a padded case. The receivers are great.
Value
The price could be a little lower in my opinion, but for the times I have used these and needed them, they are soooo worth the money. I have been hired as a DJ for a few events because of my ability to run wireless remote speakers in addition to the mains.
Manufacturer Support
Never needed support from either the manufacturer or zzounds for this product.
The Wow Factor
Looking at the unit you may not think too much, but once you have used it when it needed, you'll appreciate the unit that much more. Dont discount the non-digital version either. It works just as well.
Musical Background:
DJ and Active Musician
Musical Style:
all styles for DJing, and rock for Bass Guitar read less
Sound
The sound is fine as long as you are not too far (within 100 feet is great) and dont have interferrence issues. I have run into situations where there was noise from a battery back-up emergency lighting system, but if you use common sencse in the set up you can avoid potential problems. The levels drop a bit compared to a direct connect, but you can easily compensate. Again, use common sense in the set up and test before hand.
Features
The features are pretty much meat and potatos. You can run 1 0r 2 speakers mono or stereo, so you have flexibility. The secret is to run your output mono and split the signal so left goes into the unit and right goes to your direct connect speakers. Adjust… read more your direct connect speakers to a lower volume to compensate for the level cut on the braodcast of the unit.
Ease of Use
Once again, its easy to use,. just test out the relationship of sound levels between hard connect and the broadcast level. You'll need to have a strong signal going into the Phonic transmitter. MAKE SURE YOU USE THE CORRECT POWER ADAPTER!! The transmitter and receivers use different power.
Quality
A little more durability for the transmitter would be good,. but as long as you take care of it,. you'll be fine. I carry mine in a padded case. The receivers are great.
Value
The price could be a little lower in my opinion, but for the times I have used these and needed them, they are soooo worth the money. I have been hired as a DJ for a few events because of my ability to run wireless remote speakers in addition to the mains.
Manufacturer Support
Never needed support from either the manufacturer or zzounds for this product.
The Wow Factor
Looking at the unit you may not think too much, but once you have used it when it needed, you'll appreciate the unit that much more. Dont discount the non-digital version either. It works just as well.
Musical Background:
DJ and Active Musician
Musical Style:
all styles for DJing, and rock for Bass Guitar read less
13 of 13 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.