Peavey PR15D Powered Loudspeaker (1x15")
No longer available at zZounds
The Peavey PR15D is a bi-amplified powered system with 200 watts maximum output, featuring ultra-lightweight Class D rail switching technology.
Overview
The Peavey PR15D is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. The PR15D is capable of up to 120 dB peak SPL. The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an attractive yet-durable powered speaker system.
This two-way powered system is comprised of a 150 W class D power amplifier driving a 15 in. heavy duty woofer. The RX(tm)14 compression driver is driven by a 50 W class D power amplifier and features a 1.4" titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90* by 40*) that is molded integrally into the enclosure. A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level and line-level sensitivity. Two 1/4" phone jacks are provided for link-out / direct-in capability. The link-out is post- level and pre-crossover. While the direct-in is a direct pre-crossover input. A woofer servo senses back-EMF from the woofer voice coil that is not a result of the drive signal, and subtracts the error so that the woofer cone follows the drive waveform precisely. Constant Loudness (Fletcher-Munson) circuit for accenuating bass and treble at low listening volume levels.
The power amplifiers providing the bi-amplification are low-distortion units providing 150 W… read more continuous RMS into the nominal 8 ohm load of the woofer, and a 50 W continuous RMS into the nominal 8 ohm load of the tweeter. They were selected for their reliability and superb musical performance capability. Both amplifiers feature the patented DDT(tm) compression, which virtually eliminates audible power amplifier clipping. A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey Versamount(tm) allow maximum utility. read less
This two-way powered system is comprised of a 150 W class D power amplifier driving a 15 in. heavy duty woofer. The RX(tm)14 compression driver is driven by a 50 W class D power amplifier and features a 1.4" titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90* by 40*) that is molded integrally into the enclosure. A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level and line-level sensitivity. Two 1/4" phone jacks are provided for link-out / direct-in capability. The link-out is post- level and pre-crossover. While the direct-in is a direct pre-crossover input. A woofer servo senses back-EMF from the woofer voice coil that is not a result of the drive signal, and subtracts the error so that the woofer cone follows the drive waveform precisely. Constant Loudness (Fletcher-Munson) circuit for accenuating bass and treble at low listening volume levels.
The power amplifiers providing the bi-amplification are low-distortion units providing 150 W… read more continuous RMS into the nominal 8 ohm load of the woofer, and a 50 W continuous RMS into the nominal 8 ohm load of the tweeter. They were selected for their reliability and superb musical performance capability. Both amplifiers feature the patented DDT(tm) compression, which virtually eliminates audible power amplifier clipping. A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey Versamount(tm) allow maximum utility. read less
Specs
Bi-amplified powered system with 200 watts maximum output
Both power amps have DDT compression
One 15" speaker, 2.375" voice coil woofer
Woofer servo
RX 14 1.4" titanium compression driver
Automatic equal loudness (Fletcher-Munson) compensation
Combo jack with 1/4" TRS & female XLR mic or line-level balanced input
Two 1/4" phone jack inputs for link-out/ link-in capability
Molded-in horn has exceptionally smooth response & pattern control
Top & side handgrips
Pole mount molded-in
Top & bottom flyng point inserts
Both power amps have DDT compression
One 15" speaker, 2.375" voice coil woofer
Woofer servo
RX 14 1.4" titanium compression driver
Automatic equal loudness (Fletcher-Munson) compensation
Combo jack with 1/4" TRS & female XLR mic or line-level balanced input
Two 1/4" phone jack inputs for link-out/ link-in capability
Molded-in horn has exceptionally smooth response & pattern control
Top & side handgrips
Pole mount molded-in
Top & bottom flyng point inserts
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 877-732-8391
Email: customerservice@peavey.com
Web: https://peavey.com/c/Contact-Us
Phone: 877-732-8391
Email: customerservice@peavey.com
Web: https://peavey.com/c/Contact-Us
Reviews
Submitted March 11, 2010
"satisfied.."
Sound
I use it as an amp for my TD-12 kit. It punches out enough lows and sounds fine to me. I tried a Mackie SM450, a yorkville nx550 and db tech 405. the peavey held up and the price difference was the deciding factor.
18 of 23 people (78%) people found this review helpful. Did you?
Thanks for your opinion!
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.