Laney IRT60212 Ironheart Guitar Combo Amplifier (60 Watts, 2x12")
No longer available at zZounds
Tap into the power of the Laney Ironheart series in a convenient combo. This 2x12 includes detailed tone-shaping EQ and tone controls.
Overview
The Laney IRT60212 Ironheart guitar combo amplifier is the complete Metal Package - forged in the Black Country. The Ironheart 2 x 12 inch combo - the IRT60-212 bangs out 60 watts RMS of all ECC83 & 6L6 valve tone with masses of gain and like its metal relatives - such as the Laney Klipp and the Laney AOR hits you hard between the eyes like a power hammer from hell.
The Combo houses three sonically distinct channels: - Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone.
The IRT60-212's Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.
The Pre Boost feature makes the need to carry additional boost pedals redundant. Something any gigging player will admit is a great feature. On the IRT60-212 the footswitchable Pre Boost works just like kicking in your favourite boost pedal right before your amp. It's available where ever you are on the pre amp and can be switched in or out via the supplied footswitch.
A standout feature of the IRT60-212 range is the Watts control in the master section. This allows you to really screw down the output of the IRT60-212's 2 x 6L6 output section, down to less than 1 watt. Great for getting the sound of a full -blown metal head at bedroom levels.Combine this with a Dynamics control… read more which tightens up you low end when you're playing a full power and you have a great metal tone at whatever level you decide to play at.
The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.
The IRT60-212 features a custom designed and specifically tuned reverb allowing you to add just the right amount of reverb wash over your tone. Adding additional effects via external processors is a breeze - the FX loop on the rear of the IRT60-212 has a switchable level control meaning you can easily switch your FX loop output level to match the ideal level for your effects gear.
A full on metal combo requires something special when it comes to the speaker department.
The IRT60-212 is no exception. Housing a pair of Custom designed and voiced HH drivers, The IRT60-212 does not hold it's punches giving you aggressive, angry mids where required and lots of low end kick. Giving you tone forged from molten metal.
Every IRT60-212 is supplied with dedicated footswitch, which enables you to switch the Pre Boost, channels and reverb without having to use the front panel.
There is no doubt that IRT60-212 is a serious metal amp and much more. read less
The Combo houses three sonically distinct channels: - Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone.
The IRT60-212's Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.
The Pre Boost feature makes the need to carry additional boost pedals redundant. Something any gigging player will admit is a great feature. On the IRT60-212 the footswitchable Pre Boost works just like kicking in your favourite boost pedal right before your amp. It's available where ever you are on the pre amp and can be switched in or out via the supplied footswitch.
A standout feature of the IRT60-212 range is the Watts control in the master section. This allows you to really screw down the output of the IRT60-212's 2 x 6L6 output section, down to less than 1 watt. Great for getting the sound of a full -blown metal head at bedroom levels.Combine this with a Dynamics control… read more which tightens up you low end when you're playing a full power and you have a great metal tone at whatever level you decide to play at.
The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.
The IRT60-212 features a custom designed and specifically tuned reverb allowing you to add just the right amount of reverb wash over your tone. Adding additional effects via external processors is a breeze - the FX loop on the rear of the IRT60-212 has a switchable level control meaning you can easily switch your FX loop output level to match the ideal level for your effects gear.
A full on metal combo requires something special when it comes to the speaker department.
The IRT60-212 is no exception. Housing a pair of Custom designed and voiced HH drivers, The IRT60-212 does not hold it's punches giving you aggressive, angry mids where required and lots of low end kick. Giving you tone forged from molten metal.
Every IRT60-212 is supplied with dedicated footswitch, which enables you to switch the Pre Boost, channels and reverb without having to use the front panel.
There is no doubt that IRT60-212 is a serious metal amp and much more. read less
Specs
- - Power RMS: 60 watts RMS
- - Inputs: 1 x Jack
- - Channels: 3 - Clean, Rhythm & Lead
- - Equalisation: Bass, Middle & Treble with Pull-Push EQ shift on each
- - Master Presence Control: Overall TONE
- - Boost Switch: Footswitchable PRE BOOST
- - Preamp Valves: 4 x ECC83
- - Output Valves: 2 x 6L6
- - Class: Class AB
- - Reverb: Laney designed Digital reverb
- - Footswitch: FS4-IRT supplied as standard - switches Channel, Clean, Reverb & Pre Boost
- - Speaker connections: 2 jack sockets - 4, 8 or 16 ohms
- - FX Loop: Yes - variable level FX loop
- - Impedance: 16 ohms
- - Drivers: 2 x HH Custom Designed 12 inch drivers (16 (ohms)
- - Baffle: Angled Baffle
- - Cabinet Design: Straight fronted
- - Weight: 36.5kg
- - Dimensions (W x H x D): 526 x 715 x 228
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 615-793-8787
Email: support@laney.co.uk
Phone: 615-793-8787
Email: support@laney.co.uk
Reviews
Reviewers gave this product an overall rating of 4 out of 5 stars.
(1 ratings)
Submitted October 11, 2013 by Kurt B in West Olive, MI
"Pleased overall - but others may not dig this"
Verified Customer
zZounds has verified that this reviewer made a purchase from us.
I don't typically write these reviews unless there is something unique or I feel there is something I can offer to someone considering this purchase. There are few reviews of the Laney IRT 60 combo ( I learned when I was considering this amp) so hopefully this info helps.
Sound
The sound is great BUT it's unique and may not be for everyone. To start I will say the combo speakers were disappointing. I upgraded to a Marshall type and a Celstion speaker and was still not completely satisfied. I now run it to a 4x12 with celstions and I'm thrilled. Not sure if its the 2x12 cab but the shaping of this amp leans towards mid to high frequencies which I suppose isn't the best match for smaller cabs like a 2x12. I would likely recommend the 60 head over the 2x12 to others. You really need high bass settings ( and I use an EQ pedal) to get this amp to push some air. For metal it's extremely tight. There is no looseness to this amplifier at all. I use this amp in combination with another amp that has a bit more bass. I don't play detuned metal (more classic metal to rock) and it does the mid range - high gain stuff very well. ( think Tool, APC tone) It also reminds me of a classic 80's overdriven Marshall sound. ( think Judas Priest - Screaming for Vengeance). I will keep this amp forever but I don't expect I would use it as the sole amp in a show. For me it fits well with other amps. Those of you that tune to low alternate tuning should give this amp a try.… read more
Features
The eq options are huge. Very versatile amplifier with the exception of having much bass punch. The wattage drop was a selling point for me BUT - in my opinion this amp sounds better with the wattage dialed up, even at lower volume levels - go figure. It's much lighter than my old 5150 combo but still a bit of a workout.
Ease of Use
It takes time to dial this amp in. I also found, more than any other amp I have owned from solid state to tube, different guitars sound totally different. There is no memory save so different guitars will require either a great mental memory, or some documented settings when switching between guitars.
Quality
Seems to be built solid. No issues yet other than a push - pull knob that pulled off.
Value
I found its a great value. Tones of tone shaping and tonal features.
Manufacturer Support
No need to contact Laney yet
Musical Background:
Ive been playing in bands for 20+ years
Musical Style:
Prog, Rock, Metal read less
Sound
The sound is great BUT it's unique and may not be for everyone. To start I will say the combo speakers were disappointing. I upgraded to a Marshall type and a Celstion speaker and was still not completely satisfied. I now run it to a 4x12 with celstions and I'm thrilled. Not sure if its the 2x12 cab but the shaping of this amp leans towards mid to high frequencies which I suppose isn't the best match for smaller cabs like a 2x12. I would likely recommend the 60 head over the 2x12 to others. You really need high bass settings ( and I use an EQ pedal) to get this amp to push some air. For metal it's extremely tight. There is no looseness to this amplifier at all. I use this amp in combination with another amp that has a bit more bass. I don't play detuned metal (more classic metal to rock) and it does the mid range - high gain stuff very well. ( think Tool, APC tone) It also reminds me of a classic 80's overdriven Marshall sound. ( think Judas Priest - Screaming for Vengeance). I will keep this amp forever but I don't expect I would use it as the sole amp in a show. For me it fits well with other amps. Those of you that tune to low alternate tuning should give this amp a try.… read more
Features
The eq options are huge. Very versatile amplifier with the exception of having much bass punch. The wattage drop was a selling point for me BUT - in my opinion this amp sounds better with the wattage dialed up, even at lower volume levels - go figure. It's much lighter than my old 5150 combo but still a bit of a workout.
Ease of Use
It takes time to dial this amp in. I also found, more than any other amp I have owned from solid state to tube, different guitars sound totally different. There is no memory save so different guitars will require either a great mental memory, or some documented settings when switching between guitars.
Quality
Seems to be built solid. No issues yet other than a push - pull knob that pulled off.
Value
I found its a great value. Tones of tone shaping and tonal features.
Manufacturer Support
No need to contact Laney yet
Musical Background:
Ive been playing in bands for 20+ years
Musical Style:
Prog, Rock, Metal read less
11 of 12 people (92%) people found this review helpful. Did you?
Thanks for your opinion!
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
Fender American Professional II Stratocaster Electric Guitar, Rosewood Fingerboard (with Case)
$1,799.99
- 12 x$150.00
- 8 x$225.00
Fender American Vintage II 1961 Stratocaster Electric Guitar, Rosewood Fingerboard (with Case)
$2,299.99
- 12 x$191.67
- 8 x$287.50
Fender American Ultra Stratocaster Electric Guitar, Maple Fingerboard (with Case)
$2,199.99
- 12 x$183.33
- 8 x$275.00
Fender American Pro II HSS Stratocaster Electric Guitar, Rosewood Fingerboard (with Case)
$1,849.99
- 12 x$154.17
- 8 x$231.25