JBL SRX812P Powered Loudspeaker

Rugged yet flexible, the JBL SRX812P loudspeaker has a plethora of user-adjustable DSP, so you can tailor its sound to your performance needs.

$1,669.00

  • 18 x  
    $92.72
  • 12 x  
    $139.08
  • 8 x  
    $208.63

JBL PRX612M 2-Way Powered Speaker (1000 Watts, 1x12")

No longer available at zZounds
With a 1000 watt class-D Crown amplifier, an optimized EQ, and a 12" differential drive dual voice-coil speaker, the JBL PRX612M speaker is a step above.

Compact, durable and powerful the PRX612M from JBL offers an incredible active PA speaker that is designed for multi-purpose use as a monitor or a front-of-house main. Providing the user an incredible speaker with pristine crown amplification built right in, the PRX speakers are a powerful solution for both installed and portable setups. Don't bother with inferior speaker designs; JBL PRX has the power, the clarity and a name that's trusted.

Features

- 1000 Watt Class-D, Crown amplifier with 134db peak SPL
- Dual purpose enclosure for both front-of house and floor monitor applications
- Optimized EQ for monitor for front-of-house applications
- 12 inch Differential Drive dual voice-coil and magnetic gap, neodymium woofer
- 1.5 inch annular polymer diaphragm, neodymium, compression driver
- DSP input section, crossover and dynamic limiting
- Component optimization and selectable system EQ
- Professional XLR line and 1/4 inch Mic/Instrument inputs, with loop through
- Eight M10 fly points for horizontal or vertical suspension
- One M10 pull-back point
- Dual-angle pole mount socket

Applications

The PRX612M is comprised of a 305 mm (12 inch) 265F Differential Drive woofer, a 2408H-1, 37.5 mm (1.5 inch) annular polymer diaphragm, neodymium compression driver mounted to a 90 by 50 degree horn, all driven by 1000 watt (dual 500 watt) Crown Class-D digital power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system read more EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.

All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL's tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.

The amplifier input panel offers XLR or 1/4 inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level, via the level control knob.
read less

Specifications
System Type: Self powered 12 inch, two-way, bass-reflex

Maximum SPL Output:
- Full Range: 134 dB peak
- Monitor: 133 dB peak

Frequency Range (-10 dB):
- Full Range 50-20 kHz
- Monitor (vertical orientation) 60-20 kHz
- Monitor (monitor orientation) 51-20 kHz

Frequency Response (+/-3 dB):
- Full Range 60-17.5 kHz
- Monitor (vertical orientation) 90-18 kHz
- Monitor (monitor orientation) 61-18.5 kHz
Input Connectors: Balanced XLR-1/4 inch combo jack with XLR loop through

Input Impedance: 20K ohms (balanced), 10K ohms (unbalanced)

Signal indicators:
- Limit: Red LED indicates limiter active condition
- Signal: Green LED indicates signal present

EQ: Presets for use in Main and Monitor position

Dynamic Control (Input): dbx Type IV limiter circuit

Crossover Modes: DSP controlled
- LF: 48 dB/Oct filter slope High & Low Pass
- HF: 36 dB/Oct High Pass

Crossover Frequency: 2 kHz

Amplifier Design: Crown Class D

Power Rating: 1000 Watts (2 x 500)

LF Driver: 1 x JBL 262F-1 380 mm (12 in)
- Differential Drive dual voicecoil
- Magnetic gap, neodymium woofer

HF Driver: 1 x JBL 2408H 37.5 mm (1.5 in)
- Annular polymer diaphragm
- Neodymium compression driver

Coverage Pattern: 90 x 50 degrees nominal

Directivity Index (DI): 9.8 dB

Directivity Factor (Q): 9.6

Enclosure: Asymmetrical, 18 mm, plywood

Suspension/Mounting:
- Dual 36 mm pole socket
- 8 x M10 Suspension Points
- 1 x M10 Pull-Back Point

Transport: Integrated handle with backing cup

Finish: Obsidian DuraFlex finish

Grille: Powder coated, Obsidian
- 16 gauge perforated steel
- Acoustically transparent black cloth backing.

Dimensions (HxWxD): 23.3 x 13.9 x 13.4 inches (592 x 353 x 340 mm)

Weight: 34.5 lbs (15.6 kg)

For support or warranty questions, please contact the manufacturer:
Phone: 800-336-4525
Web: https://jblpro.com/en/support for pro audio, https://support.jbl.com for consumer/home audio

Reviewers gave this product an overall rating of 4.5 out of 5 stars. (18 ratings)
Submitted April 12, 2013 by Zlatan V in Burlington, VT

"Really amazing quality"

Overall: 4.5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
I ordered this with Zzounds on Friday afternoon, and Saturday I was already trying it out! I love how quick you guys ship your products. Now for the speaker part, First thing I noticed was how clear the sounds is, just by hooking up my iPhone and playing some jazz music. I was amazed at the quality, this speaker WILL get pretty LOUD, I am definitely more than satisfied with it. Very durable and not too heavy at all.

Musical Background:

Keyboard player
7 of 7 people (100%) people found this review helpful. Did you?
Thanks for your opinion!