Gemini GVX10P 2-Way Powered Speaker (400 Watts, 1x10")

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Gemini GVX10P 2-Way Powered Speaker (400 Watts, 1x10"), Main
Gemini GVX10P 2-Way Powered Speaker (400 Watts, 1x10"), Left
Gemini GVX10P 2-Way Powered Speaker (400 Watts, 1x10"), Rear
Gemini GVX10P 2-Way Powered Speaker (400 Watts, 1x10"), Right
Gemini GVX10P 2-Way Powered Speaker (400 Watts, 1x10"), Top
Gemini GVX10P 2-Way Powered Speaker (400 Watts, 1x10"), Main Gemini GVX10P 2-Way Powered Speaker (400 Watts, 1x10"), Left Gemini GVX10P 2-Way Powered Speaker (400 Watts, 1x10"), Rear Gemini GVX10P 2-Way Powered Speaker (400 Watts, 1x10"), Right Gemini GVX10P 2-Way Powered Speaker (400 Watts, 1x10"), Top
Balancing size and sound quality, this 2-way, bi-amped speaker from Gemini is compact but delivers a powerful punch.

The GVX10P powered PA speaker offers unmatched design and sound quality. Each Gemini GVX10P loudspeaker is thoroughly engineered to produce explosive audio accuracy. Above all, the GVX10P produces an outstanding wide dispersion that allows your entire audience to hear clearly, whether they're in the front, back, side, or any other extreme.

The sleek, compact design of the GVX10P compliments its lightweight MDF wood, offering the best portability on the road or any other installation environment. Versatile, lightweight and compact, these speakers can be stand mounted or permanently installed for use as a full range PA system that is built to last in the most demanding environments with its water resistant black paint.

Features

- 2 way bi amplified, optimized Active loudspeaker system
- 200 watts RMS power, 400 watts Peak power
- High Output Titanium driver 1.35 inches
- 10 inch woofer
- Built-in 24dB/octave at 1800Hz electronic crossover
- Amplifier thermal protection, short circuit and DC protections
- Balanced XLR LINE input with pass-thru XLR connector
- Switch Full-range / Monitor 100hz low cut filter
- Perforated steel mesh grille
- Recessed flush handles
- Water resistant textured black paint
- Flyable, Pole mountable, Floor wedge-able

Power Amplifier:
- RMS: Low Freq-165 Watts, High Freq-35 Watts
- Peak: Low Freq-330 Watts, High Freq-70 Watts

Type: 2-way bi-amplified

Frequency range: 70Hz to 20kHz

Maximum Sound pressure level: 121 dB

Woofer Impedance: 8 ohms

Woofer size: 10 inches

Woofer Magnet: 30 oz

Low frequency driver: 2 inch (50mm) Voice Coil

High Output driver type: Titanium

High Frequency driver: 1.35 inch

Horn Dispersion: 80 x 60 degrees

Connectors: Balanced XLR LINE input with pass-thru XLR

Electronic crossover frequency: 1.8 Khz

Enclosure: 18 mm (3/4 inch), MDF

Finish: Black acrylic lacquer

Grill: Perforated steel mesh grille

Handles: Recessed flush handles

Pole mount: diameter 35 mm

Weight: 40.8 lbs (18.5 kg)

Dimensions: 11.8 x 20.5 x 12.2 inches (300 x 520 x 310 mm)

For support or warranty questions, please contact the manufacturer:
Phone: 732-346-0061

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer