Gibson 2016 ES-335 Figured Top Electric Guitar (with Case)

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Main
Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Back
Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Back Angle
Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Closeup
Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Front
Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Side
Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Main Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Back Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Back Angle Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Closeup Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Front Gibson 2016 ES-335 Figured Top Electric Guitar (with Case), Side
Built with gorgeous figured maple, this ES-335 employs a sustain-inducing mix of Burstbucker pickups, an ABR-1 titanium saddle bridge and a locking tailpiece.

What's special about this item?

Feature: What it does:
Figured maple top, back, and sides Beautiful grain, clean and clear resonance
Burstbucker 1 and 2 pickups Thick, round tone with rich and creamy overtones
Gloss nitrocellulose lacquer finish Lets guitar age naturally without impeding tone
No-wire ABR-1 bridge Accurate replication of late '50s Gibson bridge

From 1958 and throughout its glory years, few Gibson ES-335s were built with figured maple tops, and those that were remain highly prized. The 2016 ES-335 Figured from Gibson Memphis capture this exotic-wood elegance in a great sounding and playing semi-acoustic.

Features:

- Beautifully figured maple back and sides
- Rosewood Fingerboard with small block inlays
- Redesigned Neck for improved strength and playabilty
- Historic truss rod
- Burstbucker 1 & 2 Pickups
- ABR-1 Bridge with titanium saddles
- Locking Stopbar Tailpiece
- High-gloss nitrocellulose lacquer Finish

- Top Wood: 3 Ply AAA Figured Maple, Poplar, Maple
- Top Binding: Cream
- Back Wood: 3 Ply AAA Figured Maple, Poplar, Maple
- Back Binding: Cream
- Rims Wood: 3 Ply AAA Figured Maple, Poplar, Maple
- Body Contour Carve: ES (Semi-Hollow)
- Neck Wood: 1 Piece Mahogany
- Truss Rod: Historic
- Neck Profile: Rounded "C"
- Thickness at Fret 1: 21.59 mm / .850"
- Thickness at Fret 12: 24.13 mm / .950"
- Peg Head: SP-1
- Peg Head Inlay: Mother of Pearl Crown
- Peg Head Logo: Mother of Pearl "Gibson"
- Nut: White
- Nut Material: Bone
- Nut Width: 4.2863 cm / 1.6875"
- Fingerboard Wood: 1 Piece Rosewood
- Fingerboard Radius: 30.48 cm / 12"
- Frets: 22
- Nut/End of Board: 4.2863 cm / 1.6875" @ nut, 5.2375 cm / 2.062" @ end of board
- Scale Length: 62.865 cm / 24.75"
- Fingerboard Binding: Cream
- Side Dots (Color): Black
- Fingerboard Inlays: Pearloid Block
- Pickups: Burstbucker 1 and Burstbucker 2
- Tuning Keys: Milk Bottle Grover Rotomatic
- Tuning Ratio: 18:01
- Bridge: ABR-1 with titanium saddles
- Tailpiece: Locking Stop Bar
- Output Jack: 1/4" mono
- Strap Buttons: Aluminum
- Pick Guard: Multi ply black ES-335
- Truss Rod Cover: Black and white bell with engraved F-Hole
- Knobs: Black Top Hat (CH & FB), Amber Top Hat (AN)

For support or warranty questions, please contact the manufacturer:
Phone: 800-444-2766

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer