Electro-Voice ETX-10P 2-Way Powered Loudspeaker

Housed in a tour-grade wood enclosure, this 10" active speaker outputs 2000 watts! Dial in your DSP limiter, delay, 3-band EQ and crossover on the rear LCD.

Designed for venues, rental companies, musicians and DJs who require high-end, reliable audio! The two-way Electro-Voice ETX-10P powered PA speaker was designed by Electro Voice with a high end 10-inch speaker and a 1.25-inch HF titanium compression driver inside a low-profile, tour-grade wood enclosure. Intelligent technology and innovative industrial design provides spectacular results across all applications.

State-of-the-art components were used in the ETX-10P to deliver the legendary EV sound quality and reliability. An incredible 2,000 watts of clean power is provided by Class-D power amplifiers with integrated DSP, producing high SPLs through the 10-inch SMX woofer and tweeter.

Intelligent technology, innovative design

EV's FIR-Drive utilizes Finite Impulse Response (FIR) filter technology to optimize transducer linearity. The ETX-10P also features advanced limiter algorithms for independent peak and thermal transducer protection.

An LCD screen allows for easy system set-up and monitoring including location/application EQ presets, limiter status, input level controls/meters and master volume control to ensure optimal gain structure. EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage across all system configurations.

Features:

- High-sensitivity 10-inch woofer and 1.25-inch compression driver with linear frequency response and high power handling
- 2,000 watt Class-D amplifier is highly efficient read more and features blower-controlled thermal management, allowing it to work in hot environments
- Eight mounting points for permanent installations
- Waveguides custom-designed and optimized specifically for the ETX-10P
- Forward-placed waveguide helps physically time-align the LF and HF transducers
- Placing the port under the waveguide minimizes distortion and standing waves in the speaker
- System DSP presets support easy setup via selections for type of use, crossover frequencies and top/sub combinations
- Limiters are displayed on the rear LCD and on the front-grille LED
- Boundary compensation filters mean it will sounds the same whether it is used as a floor monitor, on a tripod or suspended from a ceiling
- User-adjustable features include delay out to several hundred feet, three-band parametric EQ, polarity and multiple high-pass crossover points
- Handles, pole cups and amplifier chassis are die cast aluminum, not plastic
- 18-mm, 13-ply birch plywood with EVCoat for a great look and durability
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

- Frequency Response: 85 Hz - 20 kHz
- Frequency Range: 65 Hz - 20 kHz
- Maximum SPL: 134 dB peak
- Coverage (H x V): 90 x 60 degrees
- Power Rating: 2000 W
- LF Transducer: SMX2100 254 mm (10 in)
- HF Transducer: DH3-B 1.25-in titanium compression driver
- Crossover Frequency: 1700 Hz
- Connectors: (2) XLR/TRS combo jack and (1) XLR link output
- Enclosure: 18-mm, 13-ply birch plywood with EVCoat
- Grille: 16AWG steel with powdercoat
- Mounting/Suspension: (8) M10 suspension points
- Dimensions (HxWxD): 21 x 13 x 14 inches (526mmx330x365mm)
- Weight: 44.8 lb (20.3 kg)
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 50.25 lbs
Shipping Dimensions: 22 x 17 x 14 in
Manufacturer Part Number (MPN): F.01U.302.280
Pair, with Speaker Pack
Shipping Weight: 118.94 lbs

For support or warranty questions, please contact the manufacturer:
Phone: 800-289-0096
Email: technical.support@us.bosch.com
Web: https://electrovoice.com/contact-us/

New

$1,499.00
  • 18 x  
  • 12 x  
    $124.92 with zZounds
  • 8 x  
    $187.38 with zZounds
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to