Dynaudio BM5 Compact mkIII Powered Near-Field Monitor

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Dynaudio BM5 Compact mkIII Powered Near-Field Monitor, Main
Dynaudio BM5 Compact mkIII Powered Near-Field Monitor, Angle
Dynaudio BM5 Compact mkIII Powered Near-Field Monitor, Rear
Dynaudio BM5 Compact mkIII Powered Near-Field Monitor, Main Dynaudio BM5 Compact mkIII Powered Near-Field Monitor, Angle Dynaudio BM5 Compact mkIII Powered Near-Field Monitor, Rear
Get clear Dynaudio sound in a small footprint. Biamplified with 100 watts through a 5.7" woofer and 1.1" tweeter, BM5 Compact monitors tell the sonic truth.

The Dynaudio BM Compact mkIII is a premium-quality, small-format near-field powered monitor. With an ultra-high dynamic range, it hits well above its weight class thanks to intelligent design. Using ultra-lightweight aluminum wire and aluminum voice coils in its hand-crafted drivers, along with a Class D amplifier, the BM Compact mkIII provides outstanding performance.

Features:

- Higher SPL, greater frequency and power response compared to the previous generation
- 50W LF and 50W HF RMS Class D amplifier with DSP crossover
- 116dB SPL peak power output
- Frequency response of 49 Hz-24 kHz
- Extended bass with BM9S II or 14S II precision subwoofers
- HF, MF, LF analog room filters allow flexible positioning
- High pass filters at 60/80Hz for perfect subwoofer matching
- Input sensitivity switch (-10/+4dB range)
- Extended excursion 5.7" woofer with pure aluminum voice coil.
- 1.1" soft dome tweeter with pure aluminum voice coil.
- Flexible operation with XLR and RCA inputs
- Made in Denmark

- Model: BM5 Compact mkIII
- System: Two-way Active Precision Nearfield Monitor
- Max SPL 1m, pair (IEC Short Term) : 116 dB peak
- Input level for 85 dB SPL @ 1m: 80 mVrms
- Max input level (@setting): 4.8 Vrms (-10dB) 1,5 Vrms (0dB) 1 Vrms (+4dB)
- Power consumption: Standby: 0.3 W Idle: 5.8 Max: 94 W
- Amplifier power: Tweeter: 50 Woofer: 50 W
- Resonance Frequency: 58 Hz
- Bass Principle: Bass reflex
- Crossover Frequencies: 2100 Hz
- Crossover Slope: 12 dB/oct
- Tweeter: D-281 - 28 mm soft dome, rear chamber, magnetic fluid 4 mm aluminum front Pure aluminum wire voice coil
- Woofer: 145 mm molded aluminum frame/ one piece thermo formed MSP cone 38 mm voice coil with pure aluminum wire on aluminum former
- Weight: 5.4 kg / 11.9 lbs
- Dimensions: (W x H x D) 170 x 260 x 211 mm / 6.7" x 10.2" x 8.3"

For support or warranty questions, please contact the manufacturer:
Manual

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer