Conquest Custom Shop Optima Stereo Guitar Cable

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Conquest Custom Shop Optima Stereo Guitar Cable, Main
Conquest Custom Shop Optima Stereo Guitar Cable, Main
Does your guitar have a stereo 1/4" output? Split it into left and right mono signals with this 1/4" TRS stereo to dual 1/4" TS mono cable.

The Custom Shop Optima OPISG features Conquest design 4 conductor, full coverage braid shielded wire and Switchcraft #297 and 2 - #280 1/4" plugs. The Optima wire is designed for maximum low frequency EMI noise rejection. The 4 conductors form a "double hum bucking" system that reduces noise induction providing crystal clear highs, tight bottom end and full spectrum audio clarity.

Features:

- Genuine Switchcraft #297 1/4" Stereo Plug
- Genuine Switchcraft #280 1/4" Mono Plugs
- Heat shrink over the barrels of all three plugs
- 4 conductors. With each conductor being 24 gauge with a stranding of 41x40 in each conductor.
- Each conductor is .995% pure
- When the conductors are combined, the effective (actual) gauge becomes 18 and the actual conductor strand count is 41/164.
- When the conductors are combined the effective copper o.d. becomes .044
- The shield coverage is 95% of tight angle tinned .995% pure copper
- Conductor resistance is 6.39 ohms per 1000 ft.
- The shield resistance is 3.958 ohms per 1000 ft.
- Capacitance is 29 pf/ft

For use with Rickenbacker Guitars, Parker Flys and any instrument with a stereo output. Splits the stereo out from the guitar to two amps or channels.

For support or warranty questions, please contact the manufacturer:
Phone: 708-534-0390

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer