Bose L1 Pro32 Portable Line Array System

Made for medium-to-large venues, Bose's top-of-the-line L1 Pro32 stacks 32 neodymium 2" drivers in a column array, complete with the Sub1 or Sub2 subwoofer.

$2,898.00

  • 18 x  
  • 12 x  
    $241.50
  • 8 x  
    $362.25

Bose L1 Model II with B1 Bass Module

No longer available at zZounds
Lightweight and easy to set up, this Bose L1 Model II system covers an audience of up to 500. This set comes with a B1 bass module for lows down to 40 Hz.

The Bose L1 Model II Single Bass System provides wide coverage and smooth tonal balance. And it's packed with proprietary Bose(R) technologies designed to improve your amplified sound. Like the original, award-winning Bose L1 system, the Model II sound system is an all-in-one innovation that replaces conventional monitors, mixers and PA speakers. This system includes one B1 bass module for extended low-end reinforcement.

Hear why Steven Kellogg plays house concerts through a Bose L1 Model II system:


Learn more with this exclusive zZounds video from Bose:


Sound advantages -- only from Bose

The L1 Model II system's breakthrough loudspeaker produces wide, uniform sound coverage of nearly 180 degrees -- onstage and throughout an audience of up to several hundred -- with little dropoff in volume and tone. The Model II system also features Articulated Array speaker technology for better tonal balance. The loudspeaker's 24 vertically mounted drivers are precisely angled to create clearer highs and more consistent tone in the room. Even people off to the sides of these stage speakers enjoy well-balanced, detailed sound.

Deep bass from small enclosures

This Bose L1 Model II system comes with one B1 bass module to ensure more accurate amplification of lower notes for most voices and instruments -- including guitars, keyboards and various horns. Highly efficient speaker design features two 5.25-inch (13.3 cm), high-output, high-excursion drivers that produce deep, strong bass read more from a small enclosure. When connected to power stand, active equalization circuitry automatically adjusts bass signal appropriately.

B1 bass modules are considerably lighter and smaller than conventional bass bins required for the same performance. Two B1 bass modules are recommended for use as a bass guitar amplifier, and for kick drums and DJs. Power up to two B1 bass modules, or one B2 bass module, on a single power stand. With an optional PackLite(R) extended bass package, you can power up to four B1 bass modules, or up to two B2 bass modules.

Light and easy

The L1 Model II power stand weighs only 24 pounds, and its four retractable legs make it very easy to transport and set up. The power stand also has a simplified control section; the single line-level input can be used with instruments, mics, mixers, laptops, MP3 players or DVD systems.

All of the system's components are also built to handle the road. The loudspeaker has a rugged, reinforced grille, and each package includes padded carrying bags for major components.

What's in the Box?

- L1 Model II Power Stand and Cord
- Power Stand Carrying Bag
- L1 Model II Cylindrical Radiator(R) Loudspeaker (top and bottom)
- Loudspeaker Carrying Bags
- B1 Bass Module and Cable
- Bass Module Slip Cover

Features:

- Recommended for audiences up to 500
- 24-speaker articulated line array delivers 180-degree horizontal sound coverage
- Spatial Dispersion and Articulated Array speaker technologies for the most consistent tonal balance with less volume drop-off over distance
- System's interconnecting pieces allow for easy transport, setup and breakdown
- One B1 bass module included
- Integrated power amplifiers in the power stand provide clean, precise amplification for L1 Model 1S system with up to two B1 bass modules or one B2 bass module
- ToneMatch(R) port on power stand for digital audio and power connection to optional ToneMatch T4S mixer
- Analog input, trim control and signal/clip LED for line-level analog input via 1/4" TRS cable. Can be used for instruments or other audio sources like DJ mixers, MP3 players, computers or DVD systems.
- Bass module out for amplified bass output signal to one or two B1 bass modules or one B2 bass module. L1 system automatically adjusts equalization appropriately when bass modules are connected.
- Interlocking design of the four lightweight components eliminates the need for speaker stands and speaker wires. Setup takes only minutes.
- Four retractable legs fold out of power stand simultaneously for quick setup and compact transport.
- Convenient carry bags -- one each for the loudspeaker, power stand and bass module -- make getting to and from your gig that much easier.
read less

Dimensions and Weight:
L1 Model II Cylindrical Radiator loudspeaker top:
- 43.5 x 3.5 x 4 inches (HxWxD) (110.5 x 9 x 10.5 cm)
- 16.3 pounds (7.4 kg)

L1 Model II Cylindrical Radiator loudspeaker bottom:
- 43.5 x 3.5 x 4 inches (HxWxD) (110.5 x 9 x 10.5 cm)
- 17.4 pounds (7.9 kg)

L1 Model II power stand:
- 5 x 10 x 27 inches (HxWxD) (12.8 x 26.2 x 69.2 cm)
- 23.7 pounds (10.7 kg)

B1 bass module:
- 15 x 10.25 x 17.75 inches (HxWxD) (38 x 26 x 45 cm)
- 25.1 pounds (11.4 kg)

For support or warranty questions, please contact the manufacturer:
Phone: 800-869-1855 or 800-379-2073
Web: https://www.bose.com/en_us/support.html

No longer available at zZounds