Pristine live sound!
As any band without a roadie will say, load-in and breakdown is no fun. Lugging a bunch of heavy PA equipment, amps, and instruments takes time and energy away from the actual performance. But it has to be done. Behringer feels your pain, so they built the Eurolive B212A to be light and easy to carry. At only 36 pounds, setup is a snap, and you'll still get all the power and sound you'd expect from a pro-quality loudspeaker.
This two-way PA speaker contains a 12-inch long-throw woofer for tight, meaty bass. With a frequency response all the way down to 65 Hz, you'll have all the low-end punch you need to wake up the dance floor. The loudspeaker is rated at 200 Watts RMS for the lows, with 320-Watt peaks for plenty of headroom. Crank the volume and fill any venue with vivid, undistorted music. Who says you can't bring the thunder with 12's?
For snappy high-frequency sparkle, a 1.25-inch compression driver delivers response up to 20 kHz. Wailing guitars, edgy vocals, and shimmering cymbals all slice through the mix with crystal clarity. You don't need to worry about blowing this baby with 50 Watts RMS and 80-Watt peaks. The driver is coupled with a large-format conical horn for balanced high-end distribution throughout the space. To mellow-out the midrange, Behringer uses a 2.4 kHz crossover. You'll hear creamy smoothness across the entire frequency range, and the whole mix will sound natural and rich.
Some PA speakers only give those lucky few fans in the center of the room a real taste of your music, while everyone else wonders why the sound is so unfocused and muddy. B212A's have a wide dispersion range for a targeted, transparent image across the mains. Everyone gets the full-on mix, hearing all the subtle details you work so hard to include.
Onboard sound processing
Many working musicians run their own sound, tweaking their mix on the fly. The B212A's integrated sound processor gives you an additional level of control, right at the speaker, for fast fine-tuning during the performance. Suppose you're plowing through your set, and you're feeling like the bass is too boomy. You could ask the bass player to re-EQ to try and tighten up the bottom, but then he'll be pouting all night. The B212A's two-band EQ control lets you roll off the bass or boost the highs, custom-tailoring the mix while the bassist happily grinds away. Now, if only they made a knob to keep him in time...
Versatile use on stage
As with any roadworthy audio gear, Eurolive speakers are easy to integrate into your existing PA rig. Servo-balanced XLR and TRS connections match up with any mixer. The 35 mm pole-socket accepts most stand mounts to get your sound up above the crowd. With its trapezoidal design, you can also tip the enclosure on its side for use as a stage monitor. That same pristine sound quality and powerful delivery now brings you exactly what you need to lock-in tight with the rest of the band. Ergonomic carry-handles are perfect for lifting and transport, and the high-grade polymer shell stands up to the most brutal road abuse. Easy setup, and awesome sound. What more could you want?
zZounds is an authorized dealer of
The EUROLIVE B212A loudspeaker stands out from the crowd, in a world where many PA systems are big and heavy. Through an efficient design concept, the B212A speaker translates 400 Watts of power into massive punch and articulate sound.
This respected member of the EUROLIVE family is a high-power, 2-way lightweight PA active speaker solution which delivers superb sound even at extreme levels. It boasts an integrated sound processor for ultimate system control and reliable speaker protection, and consists of a 12 in. long-excursion driver and 1.25 in. titanium-diaphragm compression driver. In addition, you get an Ultra-Low Noise (ULN) Mic/Line input with Volume control plus dedicated 2-band EQ.
Experience the soundsational EUROLIVE speaker system today.
High-power 400-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact lightweight system delivers excellent sound even at extreme sound pressure levels
Integrated sound processor for ultimate system control and speaker protection
Extremely powerful 12 in. long-excursion driver provides incredibly deep bass and acoustic power
State-of-the-art 1.25 in. titanium-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential/conical horn
Ultra-low noise Mic/Line input (XLR and 1/4 in. TRS) with Volume control and Clip LED
Dedicated 2-band EQ for perfect sound adjustment
Additional Line output (XLR) allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
-- Stand mounting with 35-mm pole socket
-- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life