Product Description
Audio-Technica's omnidirectional AT899 is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. It offers the convenience of battery or phantom power; its switchable low-frequency roll-off reduces popping. This microphone is meant to be used with Audio-Technica wireless systems.
Features:
- Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
- Operates on battery or phantom power
- All wireless models available in either low-reflectance black or beige (CW-TH)
- RoHS compliant -- free from all substances specified in the EU directive on hazardous substances
- 9.8 foot cable permanently attached to mic, TA3F connector at power module
- Includes a clothing clip, viper clip, magnet clip and windscreens, element covers and interchangeable single and double mic holders
zZounds is an authorized dealer of
Audio-Technica products.
Element: Fixed-Charge Back Plate, Permanently Polarized Condenser
Polar Pattern: Omnidirectional
Frequency Response: 20-20,000 Hz
Low Frequency Roll-Off: 80 Hz, 12 Db/Octave
Open Circuit Sensitivity: Phantom: -43 Db (7.0 Mv) Re 1v At 1 Pa
Impedance: Phantom: 200 Ohms
Maximum Input Sound Level: Phantom: 138 Db Spl, 1 Khz At 1% T.H.D.
Battery: 116 Db Spl, 1 Khz At 1% T.H.D.
Dynamic Range (Typical): Phantom: 108 Db, 1 Khz At Max Spl
Battery: 86 Db, 1 Khz At Max Spl
Signal-To-Noise Ratio: 64 Db, 1 Khz At 1 Pa
Phantom Power Requirements: 11-52v Dc, 2 Ma Typical
Battery Type: 1.5v Aa/Um3
Battery Current / Life: 0.4 Ma / 1200 Hours Typical (Alkaline)
Switch: Flat, Roll-Off (Recessed)
Weight (Microphone): 0.02 Oz (0.5 G)
Dimensions (Microphone): 0.63" (16.0 Mm) Long,
0.20" (5.0 Mm) Diameter
Output Connector (Power Module): 9.8 foot cable permanently attached to mic, TA3F connector at power module
Cable: 9.8' (3.0 M) Long (Permanently Attached To Microphone), 0.08" (2.0 Mm) Diameter, 2-Conductor, Shielded Cable With Ta3f Output Connector That Mates With Tb3m Jack On Power Module
- Dimensions and Weight in Packaging
- Beige, AT899CW-TH
- Shipping Weight: 1 lbs
-
Shipping Dimensions:
4 x
6 x
1 in
- Black, AT899CW
- Shipping Weight: 1 lbs
-
Shipping Dimensions:
4 x
6 x
1 in