AKG C 516 ML MicroMic Instrument Microphone
No longer available at zZounds
This miniature cardioid condenser mounts just about anywhere! Try clamping two of them to an accordion. You can even install it inside an acoustic guitar.
Overview
Lightweight cardioid miniature microphone for use on accordions, guitar speakers, piano and keyboard/organ cabinets. The included screws and double-sided, solvent-free adhesive pads make it easy to install the microphone on your instrument or amp exactly where you need it.
Using two C 516 MLs (one on the bass and one on the treble side) and an optional B 29 L battery power supply is an ideal way to mic up an accordion.
The C 516 ML can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters.
- High mechanical-noise attenuation
- Including wireless direct adapter for easy use with AKG pocket transmitters
- Detachable microphone cable
- Ideal for miking up accordions and guitar, piano, keyboard, or organ amplifiers
Using two C 516 MLs (one on the bass and one on the treble side) and an optional B 29 L battery power supply is an ideal way to mic up an accordion.
The C 516 ML can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters.
Features:
- Cardioid instrument microphone with miniature mounting bracket- High mechanical-noise attenuation
- Including wireless direct adapter for easy use with AKG pocket transmitters
- Detachable microphone cable
- Ideal for miking up accordions and guitar, piano, keyboard, or organ amplifiers
Specs
Polar pattern: Cardiod
Frequency range: 60 Hz to 20 kHz
Sensitivity: 5 mV/Pa (-46 dBV)
Max. SPL: 130/132 dB SPL (bei k = 1 %/3 %)
Equivalent noise level: 31 dB(A)
Signal/noise ratio (A-weighted): 63 dB
Impedance: <= 200 ohms
Recommended load impedance: >= 2000 ohms
Current consumption: <= 2 mA
Power requirement: B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
Connector: 3-pin mini XLR
Cable: 1.5 m (5 ft.)
Finish: Matte black
Dimensions: length: 235 mm (9.3 in.) (microphone only); max. width: 47 mm (1.9 in.)
Net weight: 46 g (1.6 oz.) (microphone and cable)
Shipping weight: 320 g (11.3 oz.)
Frequency range: 60 Hz to 20 kHz
Sensitivity: 5 mV/Pa (-46 dBV)
Max. SPL: 130/132 dB SPL (bei k = 1 %/3 %)
Equivalent noise level: 31 dB(A)
Signal/noise ratio (A-weighted): 63 dB
Impedance: <= 200 ohms
Recommended load impedance: >= 2000 ohms
Current consumption: <= 2 mA
Power requirement: B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
Connector: 3-pin mini XLR
Cable: 1.5 m (5 ft.)
Finish: Matte black
Dimensions: length: 235 mm (9.3 in.) (microphone only); max. width: 47 mm (1.9 in.)
Net weight: 46 g (1.6 oz.) (microphone and cable)
Shipping weight: 320 g (11.3 oz.)
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.