Beyerdynamic TG-D71 Cardioid Condenser Boundary Microphone

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Beyerdynamic TG-D71 Cardioid Condenser Boundary Microphone, Action Position Back
Beyerdynamic TG-D71 Cardioid Condenser Boundary Microphone, Action Position Back
Beyerdynamic TG-D71 Cardioid Condenser Boundary Microphone, Action Position Back
Beyerdynamic TG-D71 Cardioid Condenser Boundary Microphone, Action Position Back Beyerdynamic TG-D71 Cardioid Condenser Boundary Microphone, Action Position Back Beyerdynamic TG-D71 Cardioid Condenser Boundary Microphone, Action Position Back
Capture the big, fat low-end boom of a kick drum, cajon, or grand piano with the robust, German-made, easy-to-place TG-D71 boundary mic from Beyerdynamic.

Simple positioning, an unparalleled lean and robust design and exceptional sound qualities turn the boundary microphone TG D71 into the consummate companion on stage, in rehearsal rooms or in home studios. The microphone takes sound quality to the next level when it is used on kick drums and cajons.

Well-considered features like the helpful status LED and the rubber underside enhance the microphone's emphatic design. Its simple handling is also reflected in the sound itself: Painstaking fiddling with the equalizer becomes a thing of the past when the TG D71 is put to use.

Features:

- Boundary microphone (semi-cardioid)
- An extremely tough housing with a compact, lean design
- Perfect for kick drums, cajons and grand pianos with a non-slip rubber underside
- Powerful, natural sound
- Made in Germany

- Transducer type: Condenser (back electret)
- Operating principle: Pressure gradient
- Polar pattern: Half-cardioid
- Frequency response: 25 - 20,000 Hz
- Open circuit voltage: 1.5 mV/Pa (-56 dBV)
- Nominal impedance: < 200 Ohm
- Load impedance: >= 1 kOhm
- Max. SPL at 1 kHz: 148 dB [SPL@1% THD]
- Signal-to-noise ratio: 63 dB [A, RMS] 50 dB [CCIR, Q-Peak]
- Noise voltage: 1.1 \0x03BCV [A, RMS], 4.9 \0x03BCV [CCIR, Q-Peak]
- A-weighted equivalent SPL: 31.2 dB
- Polarity: Positive pressure produces positive voltage on pin 2 in relation to pin 3
- Wiring: bal. with 3-pin XLR male
- Connection: XLR, 3-pin, male
- Power supply: Phantom power
- P48 (+48 VDC +/-4 VDC, 6.8 kOhm+/-20%, current consumption: < 3.2 mA)
- P24 (+24 VDC +/-4 VDC, 1.2 kOhm+/-20%, current consumption: < 3.2 mA)
- P12 (+12 VDC +/-4 VDC, 680 Ohm+/-20%, current consumption: < 3.2 mA)
- Dimensions without connector (L x W x H): 90 x 86

For support or warranty questions, please contact the manufacturer:
Phone: 631-293-3200
Email: info@beyerdynamic-usa.com
Web: https://north-america.beyerdynamic.com/company/contact/contact-form

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer