JBL PRX912 Powered Loudspeaker
Get loud and clear with JBL's PRX900 series! These 12" powered speakers let you customize your sound with DSP and remote control via the JBL Pro Connect app.
$999.00
- 12 payments of$83.25/mo
- No Credit Check6 payments of$166.50/mo
JBL PRX612M 2-Way Powered Speaker (1000 Watts, 1x12")
No longer available at zZounds
zZounds Gear Experts Say...
With a 1000 watt class-D Crown amplifier, an optimized EQ, and a 12" differential drive dual voice-coil speaker, the JBL PRX612M speaker is a step above.
Overview
Compact, durable and powerful the PRX612M from JBL offers an incredible active PA speaker that is designed for multi-purpose use as a monitor or a front-of-house main. Providing the user an incredible speaker with pristine crown amplification built right in, the PRX speakers are a powerful solution for both installed and portable setups. Don't bother with inferior speaker designs; JBL PRX has the power, the clarity and a name that's trusted.
- Dual purpose enclosure for both front-of house and floor monitor applications
- Optimized EQ for monitor for front-of-house applications
- 12 inch Differential Drive dual voice-coil and magnetic gap, neodymium woofer
- 1.5 inch annular polymer diaphragm, neodymium, compression driver
- DSP input section, crossover and dynamic limiting
- Component optimization and selectable system EQ
- Professional XLR line and 1/4 inch Mic/Instrument inputs, with loop through
- Eight M10 fly points for horizontal or vertical suspension
- One M10 pull-back point
- Dual-angle pole mount socket
All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL's tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.
The amplifier input panel offers XLR or 1/4 inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level, via the level control knob. read less
Features
- 1000 Watt Class-D, Crown amplifier with 134db peak SPL- Dual purpose enclosure for both front-of house and floor monitor applications
- Optimized EQ for monitor for front-of-house applications
- 12 inch Differential Drive dual voice-coil and magnetic gap, neodymium woofer
- 1.5 inch annular polymer diaphragm, neodymium, compression driver
- DSP input section, crossover and dynamic limiting
- Component optimization and selectable system EQ
- Professional XLR line and 1/4 inch Mic/Instrument inputs, with loop through
- Eight M10 fly points for horizontal or vertical suspension
- One M10 pull-back point
- Dual-angle pole mount socket
Applications
The PRX612M is comprised of a 305 mm (12 inch) 265F Differential Drive woofer, a 2408H-1, 37.5 mm (1.5 inch) annular polymer diaphragm, neodymium compression driver mounted to a 90 by 50 degree horn, all driven by 1000 watt (dual 500 watt) Crown Class-D digital power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system… read more EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL's tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.
The amplifier input panel offers XLR or 1/4 inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level, via the level control knob. read less
Specs
Specifications
System Type: Self powered 12 inch, two-way, bass-reflex
Maximum SPL Output:
- Full Range: 134 dB peak
- Monitor: 133 dB peak
Frequency Range (-10 dB):
- Full Range 50-20 kHz
- Monitor (vertical orientation) 60-20 kHz
- Monitor (monitor orientation) 51-20 kHz
Frequency Response (+/-3 dB):
- Full Range 60-17.5 kHz
- Monitor (vertical orientation) 90-18 kHz
- Monitor (monitor orientation) 61-18.5 kHz
Input Connectors: Balanced XLR-1/4 inch combo jack with XLR loop through
Input Impedance: 20K ohms (balanced), 10K ohms (unbalanced)
Signal indicators:
- Limit: Red LED indicates limiter active condition
- Signal: Green LED indicates signal present
EQ: Presets for use in Main and Monitor position
Dynamic Control (Input): dbx Type IV limiter circuit
Crossover Modes: DSP controlled
- LF: 48 dB/Oct filter slope High & Low Pass
- HF: 36 dB/Oct High Pass
Crossover Frequency: 2 kHz
Amplifier Design: Crown Class D
Power Rating: 1000 Watts (2 x 500)
LF Driver: 1 x JBL 262F-1 380 mm (12 in)
- Differential Drive dual voicecoil
- Magnetic gap, neodymium woofer
HF Driver: 1 x JBL 2408H 37.5 mm (1.5 in)
- Annular polymer diaphragm
- Neodymium compression driver
Coverage Pattern: 90 x 50 degrees nominal
Directivity Index (DI): 9.8 dB
Directivity Factor (Q): 9.6
Enclosure: Asymmetrical, 18 mm, plywood
Suspension/Mounting:
- Dual 36 mm pole socket
- 8 x M10 Suspension Points
- 1 x M10 Pull-Back Point
Transport: Integrated handle with backing cup
Finish: Obsidian DuraFlex finish
Grille: Powder coated, Obsidian
- 16 gauge perforated steel
- Acoustically transparent black cloth backing.
Dimensions (HxWxD): 23.3 x 13.9 x 13.4 inches (592 x 353 x 340 mm)
Weight: 34.5 lbs (15.6 kg)
System Type: Self powered 12 inch, two-way, bass-reflex
Maximum SPL Output:
- Full Range: 134 dB peak
- Monitor: 133 dB peak
Frequency Range (-10 dB):
- Full Range 50-20 kHz
- Monitor (vertical orientation) 60-20 kHz
- Monitor (monitor orientation) 51-20 kHz
Frequency Response (+/-3 dB):
- Full Range 60-17.5 kHz
- Monitor (vertical orientation) 90-18 kHz
- Monitor (monitor orientation) 61-18.5 kHz
Input Connectors: Balanced XLR-1/4 inch combo jack with XLR loop through
Input Impedance: 20K ohms (balanced), 10K ohms (unbalanced)
Signal indicators:
- Limit: Red LED indicates limiter active condition
- Signal: Green LED indicates signal present
EQ: Presets for use in Main and Monitor position
Dynamic Control (Input): dbx Type IV limiter circuit
Crossover Modes: DSP controlled
- LF: 48 dB/Oct filter slope High & Low Pass
- HF: 36 dB/Oct High Pass
Crossover Frequency: 2 kHz
Amplifier Design: Crown Class D
Power Rating: 1000 Watts (2 x 500)
LF Driver: 1 x JBL 262F-1 380 mm (12 in)
- Differential Drive dual voicecoil
- Magnetic gap, neodymium woofer
HF Driver: 1 x JBL 2408H 37.5 mm (1.5 in)
- Annular polymer diaphragm
- Neodymium compression driver
Coverage Pattern: 90 x 50 degrees nominal
Directivity Index (DI): 9.8 dB
Directivity Factor (Q): 9.6
Enclosure: Asymmetrical, 18 mm, plywood
Suspension/Mounting:
- Dual 36 mm pole socket
- 8 x M10 Suspension Points
- 1 x M10 Pull-Back Point
Transport: Integrated handle with backing cup
Finish: Obsidian DuraFlex finish
Grille: Powder coated, Obsidian
- 16 gauge perforated steel
- Acoustically transparent black cloth backing.
Dimensions (HxWxD): 23.3 x 13.9 x 13.4 inches (592 x 353 x 340 mm)
Weight: 34.5 lbs (15.6 kg)
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-336-4525
Web: https://jblpro.com/en/support for pro audio, https://support.jbl.com for consumer/home audio
Phone: 800-336-4525
Web: https://jblpro.com/en/support for pro audio, https://support.jbl.com for consumer/home audio
Reviews
Reviewers gave this product an overall rating of 4.5 out of 5 stars.
(18 ratings)
Submitted April 12, 2013 by Zlatan V in Burlington, VT
"Really amazing quality"
Verified Purchaser
zZounds has verified that this reviewer purchased this specific product from us.
I ordered this with Zzounds on Friday afternoon, and Saturday I was already trying it out! I love how quick you guys ship your products. Now for the speaker part, First thing I noticed was how clear the sounds is, just by hooking up my iPhone and playing some jazz music. I was amazed at the quality, this speaker WILL get pretty LOUD, I am definitely more than satisfied with it. Very durable and not too heavy at all.
Musical Background:
Keyboard player
7 of 7 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.