The 882i unit features dual-mono operation with balanced XLR inputs and outputs. It is designed for applications requiring low noise, high headroom and +4dBu input levels.
The BBE 882i was designed to offer far greater strength under demanding applications such as sound reinforcement and touring.
It features a 1/4 in. thick extruded aluminum faceplate anchored to the chassis via hex head bolts, and it also benefits from improved graphics which are easier to read in poorly lit environments. In addition, new knurled, aluminum knobs have been incorporated for ease of control and a more positive feel, often critical to musicians, live sound mixers and DJs making fine adjustments mid-performance.
Both models employ 1% metal film resistors and military spec PCBs with extra thick traces. Further optimizing signal flow, all pots, switches and jacks mount directly to the PC boards of these units, which also feature the extremely quiet, proprietary Sonic Maximizer op amp, designed by BBE.
Applications
Professional recording studios
Pro and semi-pro sound reinforcement
Multitrack studios
Cassette copies
Nightclub sound systems
Broadcast transmission
Features
+4dBu balanced line (1/4" tip-ring-sleeve and XLR inputs and outputs)
+23dBu headroom
Active balanced outputs
Hardwire bypass
Bypass switch for comparison of processed to unprocessed signal
Technical Info
Process Mode: Program controlled
Bypass Mode: 10Hz to 50kHz, +/- 0.5dBu, 0dBu input
Signal to Noise Ratio: 115dB Process IN
THD, Process mode: less than 0.025% 20-20kHz
Bypass mode: less than 0.002% 20-20kHz
Maximum Output: +23dBu (may vary due to control settings)
Input Impedance: 14.7K Ohms, balanced 1/4" stereo phone jack or XLR jack. Pin #2 is the hot or "+" signal.
Output Impedance: 600 Ohms, balanced 1/4" stereo phone jack or XLR jack. Pin #2 is the hot or "+" signal.
Sensitivity: -45dBu for maximum process
Maximum Process: +12dBu boost at 5kHz, 0dBu input
Lo Contour: +12dBu adjustment at 50Hz, 0dBu input 
loading...
