EBTech HE8 8-Channel Hum Eliminator Rack

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
EBTech HE8 8-Channel Hum Eliminator Rack, Main
EBTech HE8 8-Channel Hum Eliminator Rack, Main
EBTech HE8 8-Channel Hum Eliminator Rack, Back
EBTech HE8 8-Channel Hum Eliminator Rack, Back
EBTech HE8 8-Channel Hum Eliminator Rack, Main
EBTech HE8 8-Channel Hum Eliminator Rack, Back
EBTech HE8 8-Channel Hum Eliminator Rack, Main
EBTech HE8 8-Channel Hum Eliminator Rack, Back
EBTech HE8 8-Channel Hum Eliminator Rack, Main EBTech HE8 8-Channel Hum Eliminator Rack, Main EBTech HE8 8-Channel Hum Eliminator Rack, Back EBTech HE8 8-Channel Hum Eliminator Rack, Back EBTech HE8 8-Channel Hum Eliminator Rack, Main EBTech HE8 8-Channel Hum Eliminator Rack, Back EBTech HE8 8-Channel Hum Eliminator Rack, Main EBTech HE8 8-Channel Hum Eliminator Rack, Back
Obliterate buzz with this Ebtech hum eliminator. The 8-channel, rackmountable unit breaks ground loops without disturbing signal grounds.

Do you hear hum or buzz in your audio signal? Are long, unbalanced lines across stage creating problems? Get the Hum Eliminator!

Almost all AC hum (60 Hz in the U.S.) is caused by ground loops. These ground loops act like radio antennae picking up hum and noise. The Hum Eliminator completely eliminates this by breaking ground loops, making it impossible for the signal lines to pick up the AC hum and noise.

Just plug the Hum Eliminator into the signal lines between offending pieces of equipment and you're done. Quick and easy!

Features
Eliminates AC hum/60Hz buzz and noise, quick and easy.

Breaks ground loops safely, while leaving all signal grounds intact.

Automatically translates signal voltages to match differences in ground potentials, avoiding clipping.

Converts automatically back and forth between balanced and unbalanced lines at either end.

1/4 in. TRS "smart" jacks (tip, ring, sleeve) inputs and outputs.

Completely passive design with audiophile quality components assures the best possible noise- and distortion-free performance.

Frequency response: 20Hz to 70kHz plus or minus 0.5dB

Distortion: less than 0.005% THD @ 1kHz

Crosstalk: better than -97dB

Maximum source impedance: 1k0hm

Minimum load impedance: 10k0hm

2-year warranty

Ebtech quality and reliability

Made in the U.S.A.

For support or warranty questions, please contact the manufacturer:
Phone: 847-639-4646
Brochure
Features and Specs
Finding Ground Loops and AC Hum

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer