Audio-Technica U891RCX Condenser Boundary Microphone

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Audio-Technica U891RCX Condenser Boundary Microphone, Main
Audio-Technica U891RCX Condenser Boundary Microphone, Movement
Audio-Technica U891RCX Condenser Boundary Microphone, Main Audio-Technica U891RCX Condenser Boundary Microphone, Movement
Mount the low-profile A-T U891RCX condenser boundary mic to a desk, table, lectern, or stage floor for sound reinforcement, conferencing, and more.

A wide range condenser microphone with a cardioid polar pattern, the Audio-Technica U891RCX is equipped with local or remote switching options. For flexible control in conference and boardroom installations, the unit's external contact closure ability allows a user to trigger an external device, a camera, for instance, from a switch on the microphone. Another ease-of-use feature: the microphone's activation switch can be set to three operating modes: touch-on/touch-off, press to talk, and press to mute.

The Audio-Technica U891RCX is also equipped an 80 Hz low-cut UniSteep filter to reduce pickup of low-frequency ambient noise. Its red LED status indicator can be controlled remotely. UniGuard innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; a unique rotating PivotPoint connector changes the cable exit point, no tools required. It requires 11 to 52V DC phantom power, which operates the microphone and switch circuitry.

Features

- Designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup situations
- An activation switch can be set to any of three operating modes: touch-on/touch-off, touch-to-talk and touch-to-mute
- External contact closure capability permits control of remote devices from microphone switch
- External LED control allows for accurate depiction of… read more the live status of the microphone
- PivotPoint rotating output connector allows cable to exit from either the rear or the bottom of the microphone
- Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
- UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
- Low-profile design with low-reflectance black finish for minimum visibility
- Improved switch design read less

- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
- Freq Response: 30-20,000 Hz
- Low Freq Roll-Off: 80 Hz, 18 dB/octave
- Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
- Impedance: 200 ohms
- Max Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 104 dB, 1 kHz at Max SPL
- Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 4 mA typical
- Weight: 266 g (9.4 oz)
- Dimensions(LxWxH): 4.25 x 3.31 x 0.91 inches
- Output Connector: TB5M-type
- Cable: 25.0 feet long, 5-conductor shielded cable (2 conductors under shield; 3 control wires outside shield); TA5F-type connector at microphone end, output end stripped and tinned for connection to electronic device
- Included Accessories: Soft protective pouch

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Manual

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer