Behringer UB1202FX Stereo Mixer with Effects

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Behringer UB1202FX Stereo Mixer with Effects, Main
Behringer UB1202FX Stereo Mixer with Effects, Main
12-input, 2-bus mic/line mixer, ultra low-noise mic preamps, 24-bit digital stereo FX processor

They say, "Never change a winning horse", but we just couldn't resist. Already an absolute best-seller, our UB1202 12-input, 2-bus mic/line mixer now also features a stellar 24-bit/40 kHz multi-FX processor with 100 great-sounding presets including reverb, chorus, flanger, delay, pitch shifter and more. Also packed into this compact mixer are the same state-of-the-art Invisible Mic Preamps, ultra low-noise design circuitry and a 3-band EQ plus switchable low-cut filter on all mono channels'the features that have made the entire UB series so successful. The UB1202FX is a versatile mixer with possible applications ranging from connecting a DAT recorder and monitor speakers to running permanent video and audio installations.

Features
Ultra low-noise ULN design, highest possible headroom, ultra-transparent audio

4 new state-of-the-art, studio-grade IMP 'Invisible' Mic Preamps with:
- 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
- Ultra-wide 60 dB gain range
- Lowest possible distortion 0.0007% (20 Hz - 20 kHz)

Integrated 24-bit digital stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects

Effective, ultra-musical 3-band EQ plus switchable low-cut filter on all mono channels

State-of-the-art 4580 operational amplifiers provide lowest noise and distortion, better than 4560 op amps

Clip LEDs on all mono channels

12 balanced high-headroom line inputs with +4/-10 level selection on all stereo… read more channels

FX send control per channel for internal FX processor and/or as external send

Main mix outputs plus separate control room, phones and stereo CD/tape outputs

CD/tape inputs assignable to main mix or control room/phones outputs

Switchable +48 V phantom power for condenser microphones

Long-wearing 60-mm logarithmic-taper Alps(R) fader and sealed rotary controls

External power supply for noise-free audio and superior transient response

High-quality components and exceptionally rugged construction ensure long life

Conceived and designed by Behringer Germany read less

Mono Inputs
Microphone inputs
(IMP "Invisible Mic Preamp)

Type: XLR, electronically balanced, discrete input circuit

Mic EIN (20Hz - 20kHz):
- @ 0 Ohms Source Resistance: -134dB/135.7dB A-weighted
- @ 50 Ohms Source Resistance: -131dB/133.3dB A-weighted
- @ 150 Ohms Source Resistance: -129dB/130.5dB A-weighted

Frequency Response:
-1dB: <10Hz - 150kHz

Gain Range: +10 to +60dB

Maximum Input Level: +12dBu @ 10dB gain

Impedance (approx.): 2.6 kOhms balanced

Signal-to-Noise Ratio: 107dB/111dB A-weighted (0dBu In @ +22dB gain)

Distortion (THD+N): 0.005%/0.003% A-weighted

Line Input
Type: 1/4 in. TRS connector electronically balanced

Impedance (approx.):
- Balanced: 20kOhms
- Unbalanced: 10kOhms

Gain Range: -10 to +40dB

Maximum Input Level: +20dBu @ 0dB Gain

Fade Out Attenuation (Crosstalk Attenuation)
Main Fader Closed: 85dB

Channel Fader Closed: 88dB

Frequency Response
Microphone Input to Main Out
<10Hz - 80kHz: +0dB/-1dB
<10Hz - 137kHz: +0dB/-3dB

Stereo Inputs
Type: 1/4 in. TRS connector, electronically balanced

Impedance:
- Balanced: 20kOhms
- Unbalanced: 10kOhms
(+4dBu operating level)

-Balanced: approx. 20kOhms
-Unbalanced: 5kOhms
(-10dBV)

Maximum Input Level: +22dBu

EQ Mono Channels
Low: 80Hz, +/-15dB
Mid: 2.5 KHz, +/-15dB
High: 12kHz, +/-15dB

Audio Outputs
FX Sends
Type: 1/4 in. TS connector, unbalanced

Impedance: Approx. 120 Ohms

Maximum Output Level: +22dBu

Main Outputs
Type: 1/4 in. TRS connector, unbalanced

Impedance: Approx 120 Ohm

Maximum Output Level: +22dBu

Control Room Outputs
Type: 1/4 in. TS connector, unbalanced

Impedance: Approx. 120 Ohms

Maximum Output Level: +22dBu

Power
Mains Voltage: 120 V~, 60Hz, MXUL6 adapter

Physical
Dimensions: 1-5/6 x 9-1/2 x 8-2/3 in. (47 x 242 x 220 mm)

Weight (approx.): 2.97 lbs (1.35 kg)

For support or warranty questions, please contact the manufacturer:
Web: https://www.behringer.com/service.html
Manual

Reviewers gave this product an overall rating of 4 out of 5 stars. (12 ratings)
Submitted November 10, 2005 by a customer from yahoo.com

"Great Features! - But no power switch!?!"

Overall: 4 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
This mixer works perfect for me. The downside is I will have to rig up a power switch for the convenience.
Sound
I just got this to use for live sound in my studio, there is a slight degree of noise when connected to my PA. But the built-in 100 effects are really nice.
Features
The only reason I rate the features so low is because Uli B. forgot to add a power switch to this mixer! How can you not have a power switch? Other than than that all the other features are perfect.
Quality
It built pretty-well for such a small mixer. And it has so many features for its size.
Value
If this thing had a power switch I would have given it a 10.
Manufacturer Support
I never had to deal with them fortunately.

Musical Background:

Active Musician

Musical Style:

Pop-rock
3 of 3 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
Rate and Review this Product
Read more reviews

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer