Welcome to zZounds. Get free shipping on instruments and musical equipment, easy zero-interest payment plans, and top-rated service.
Customer Kudos
"You put your trust in someone else's hands when ordering instruments online and zZounds has always come through. Every time I've ordered from zZounds it has been a great experience. Great instruments, great prices, great ppl and support and I always feel like I handpicked my instrument. Who could ask for more?"
Search Results
-
Hosa BNC 50-ohm Coax Cable
Great for use with 10BASE2 networks and RF antennas, the Hosa BNC 50-Ohm coaxial cable uses oxygen-free copper and a shielded design to minimize EMI and RFI.
-
RCF Fly Bar HDL 20 Light Suspending Bar for HDL 20-A
Suspend up to four HDL 20-A speakers in your venue with this custom, black steel fly bar from RCF. Pins included.
$799.00
- 12 x$66.58
- No Credit Check6 x$133.17
-
Hosa RMC-180 Rack Mounting Hardware
Install rack-mountable gear easily and securely. With this set, you'll get 24 screws and washers designed to fit audio gear racks without damaging them.
-
RCF AC-PRO-PM 35mm Subwoofer Pole-Mount
Mount a main PA loudspeaker over a subwoofer safely and securely with the AC-PRO-PM subwoofer pole mount from RCF. Works with 35mm speaker pole sockets.
$179.00
- No Credit Check6 x$29.83
-
RCF ART 910-A Active Loudspeaker (2100 Watts)
Treat your audience's ears with respect! The RCF ART 910-A produces a clear, phase-aligned sound for hours of fatigue-free listening, even at high volumes.
$749.00
- 12 x$62.42
- No Credit Check6 x$124.83
-
Hosa LED Console Lamp
Shed light on your mixing board with this flexible console lamp by Hosa. Its warm lighting and long-lasting LEDs reduce cost and energy use.
-
Hosa GLT-255 Ground Lifter, XLR-3F to XLR-3M
Got ground loops interfering with your audio? This simple XLR in-line adapter lifts pin 1, un-grounding the signal and helping eliminate hum in XLR cables.
-
RCF SUB 905-AS MK3 Powered Subwoofer
With a tough birch cabinet outside, smart Bass Motion Control DSP inside, and output up to 133 dB SPL, RCF's 2200-watt 15" powered sub can handle any gig.
-
RCF HD 15-A Active Powered Speaker
With precisely designed components and powerful DSP, the RCF HD 15-A speaker delivers 1400 watts of smooth, clear sound with room-filling projection.
$999.00
- 18 x$55.50
- No Credit Check6 x$166.50
-
RCF ART 745-A MK5 Active Loudspeaker
The ART 745-A MK5 is the flagship speaker in its category. The titanium dome, 4.0" voice coil neodymium compression driver offers a unique vocal clarity and sound projection. The 15" neodymium woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalization, phase control, soft limiting and speaker protections.
-
Whirlwind EDB1 Direct Box
Durable and compact, the Whirlwind direct box maintains clean, exact sound. It has a 3-level pad switch, ground lift and 1/4-inch in and through jacks.
-
RCF FL-B LGT HDL 10 Light Fly Bar for Up to 6 HDL 10-A
Suspend up to six HDL 10-A line array speakers with the FB-HDL10-LIGHT steel fly bar from RCF. Includes stack bar, pickup point, pole mount, and 7 pins.
$749.00
- 12 x$62.42
- No Credit Check6 x$124.83
-
RCF Cover for ST 12-SMA II
Provide your speakers with some heavy-duty protection to keep them looking new. This durable nylon cover has been custom designed for the ST 12-SMA MkII.
-
RCF Cover-HD15 Protective Cover For HD15 HD35 HD45
Transport your HD15, HD35, or HD45 speaker safely with this specially designed protective cover from RCF. Includes zippered openings with Velcro fasteners.
-
Whirlwind SP1X3 1x3 Microphone Splitter
Send a microphone-level signal 3 separate ways. The Whirlwind SP1X3 splitter has one XLR input and 3 transformer-isolated outputs with ground lift switches.
-
RCF AC-PM-M20 M20 Thread Subwoofer Pole Mount
Mount a main speaker on any subwoofer that has M20 threading with the RCF AC-PM-M20 subwoofer pole mount. Adjustable from 28.5 inches to 44.5 inches.
-
Whirlwind SPLIT 6 1x6 Line Level Parallel Splitter
Split a line-level XLR input and send it every which way without signal loss. The Whirlwind SPLIT 6 gives you one female XLR input and 6 male XLR outputs.
-
Whirlwind IMP2 Standard Direct Box
The Whirlwind IMP2 is a simple, standard, yet bulletproof DI box. Passive operation eliminates concerns about powering up on a crowded stage.
-
RCF Cover for NX 15-SMA
Keep your RCF NX 15-SMA in tip-top shape with a cover! This cover features foam rubber padding and a durable exterior to keep your speakers looking fresh.
-
RCF Cover for NX 10-SMA
Give your monitors extra protection with RCF speaker covers. Crafted specifically to fit NX 10-SMA speakers, these durable covers are made to take a beating.