Welcome to zZounds. Get free shipping on instruments and musical equipment, easy zero-interest payment plans, and top-rated service.
Customer Kudos
"zZounds' return policy is exceptionally reasonable, their pay-to-play option is very handy, and the support staff with whom I've spoken on the phone have been, without fail, knowledgeable and friendly."
Search Results
-
Antelope Audio Atlas i8 Isobaric Active Studio Monitor
With an isobaric pair of 8" woofers, coaxial midrange/HF drivers, and smart DSP on board, these monitors deliver the accuracy you expect from Antelope Audio.
$1,995.00
- 12 x$166.25
-
Antelope Audio Axino Synergy Core USB Modeling Microphone
Record with Antelope's awesome mic emulations and FX! This USB-powered cardioid condenser has Synergy Core FPGA+DSP processing built into the mic itself.
$239.00
- No Credit Check6 x$39.83
-
Antelope Audio Edge Duo Dual-Diaphragm Multi-Pattern Modeling Microphone
With this dual-membrane condenser and Antelope's mind-bending modeling engine, you can emulate famous classic mics -- and even tweak pickup patterns in post!
$1,095.00
- 12 x$91.25
- No Credit Check6 x$182.50
-
Antelope Audio Edge GO USB-Powered Multi-Pattern Modeling Microphone
Record through Antelope's killer FX and mic models in a multi-pattern USB microphone! The Edge GO's FPGA processors deliver powerful, detailed emulations.
$1,395.00
- 12 x$116.25
-
Antelope Audio Edge Note Small-Diaphragm Condenser Modeling Microphone
An affordable entry into Antelope's world of mic modeling, the Edge Note recreates the sound of classic studio microphones -- with up to 146 dB SPL handling!
$129.00
- No Credit Check6 x$21.50
-
Antelope Audio Edge Solo Modeling Microphone
Enter the world of mic modeling! The Edge Solo fixed-cardioid large-diaphragm condenser emulates vintage microphones via Antelope's cutting-edge software.
$695.00
- 12 x$57.92
- No Credit Check6 x$115.83
-
Antelope Audio Isochrone OCX HD 768 kHz HD Master Clock
Sync your entire studio -- up to 768 kHz -- with Antelope's Acoustically Focused Clocking jitter management algorithm and oven-controlled crystal oscillator.
$1,795.00
- 12 x$149.58
-
Antelope Audio MRC Remote Control
If you're mixing in surround on an Antelope interface like the Galaxy 32 Synergy Core or Orion 32+ Gen 4, the MRC remote is here to simplify your workflow.
$799.00
- 12 x$66.58
- No Credit Check6 x$133.17
-
Hosa ATT-448 Input Attenuator, XLR Female to XLR Male
With this 3-position switch on your dynamic microphone's XLR cable, it's easy for a louder singer/speaker to adjust their volume down by -20, -30 or -40 dB.
-
Hosa CDL-313 S/PDIF Coaxial to AES/EBU Digital Audio Interface
With S/PDIF I/O on RCA connectors and AES/EBU I/O on XLR connectors, this handy box makes it easy to send and receive two channels of digital audio.
$172.95
- No Credit Check6 x$28.82
-
Hosa GMS-274 Microphone Power Switch
Do you wish your microphone had a power button? Add an on/off switch to any XLR dynamic microphone by plugging this in-line adapter into the base of the mic.
-
Hosa MHD-3 Microphone Clip Adapter US to EU
Mic clip won't screw onto your mic stand? Use the Hosa MHD-3 microphone clip adapter to convert US threading to European threading.
-
Hosa MHD-3-BULK US To EU Microphone Clip Adaptor
European mic clips use 3/8-inch 16 thread mounts, and standard US clips use 5/8-inch 27 thread mounts. Adapt a US clip to Euro threading with this adapter!
-
Hosa MHD-4 Microphone Stand Adapter
Will that European mic mount fit on your standard US mic stand? Just add this adapter to your microphone stand to convert it from US to European threading.
-
Hosa MHR-122 Microphone Clip
With a spring-loaded jaw that securely holds a wide range of handheld microphones, this microphone clip lets performers remove the mic quickly and easily.
-
Hosa MHR-225 Microphone Clip
Don't get stuck without enough mic clips to go around! Designed to fit standard handheld microphones, this sturdy clip holds your mic securely on its stand.
-
Hosa MHR-422 Rubber Microphone Clip
Don't get stuck without an extra clip to hold your stage mics! Hosa's durable, flexible rubber mic clip grips microphones with a diameter of 0.87" (22mm).
-
Hosa MHR-425 Rubber Microphone Clip
Need a replacement clip for a wireless mic? Made to securely grip mics with a 1" (25mm) diameter, this clip is a great fit for wireless handheld microphones.
-
Hosa MIT-129 Female TS 1/4" to XLR Male Impedance Transformer
No Hi-Z instrument jack? Use this impedance-matching transformer to plug a high-impedance 1/4" guitar or bass cord into your mixer's low-impedance XLR input.
-
Hosa MIT-156 Impedance Matcher Transformer, XLR-3F to 1/8" TRS
You can plug an XLR microphone into a 1/8" stereo audio input when you add this impedance-matching adapter. It's ideal for connecting XLR mics to camcorders.