Galaxy Audio PSER/52GTR Guitar/Bass Wireless System

No longer available at zZounds

Go wireless with Galaxy Audio. The PSER/52GTR wireless system includes the PSER receiver, MBP52 body-pack transmitter, instrument cable, and rackmount kit.

Overview

Part of the Galaxy Audio PSE wireless series, the PSER/52GTR wireless system includes the PSER receiver, the MBP52 body-pack transmitter, guitar/instrument cable, antennas, 1/4" to 1/4" cable, power supply, rack ears, and screws.

The PSER multi-channel microphone receiver features a volume control, channel display, Diversity Antennas and IR Sync. The PSE has an XLR 1/4" output and squelch adjustment. The PSER is a UHF diversity receiver with 16 selectable channels.

The PSER can be used and will sync with either the HH52 or MBP52 transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2 AA batteries. The MBP52 body pack transmitter has a 0/-10/Mic selector switch.

Features:

- 300' Range
- 16 Selectable UHF Frequencies
- Diversity Antennas
- Single/Dual Rack Mount Included
- Output Volume Control
- IR Sync Receiver to Transmitter
- AF Level Indicator
- Active Antenna Indicator
- Squelch Adjustment
- XLR / 1/4" Outputs
- Detachable BNC Antennas
- Metal Chassis

Specs

Available Frequencies: 16
Frequency Ranges:
CODE D 584~607MHz
CODE N 518~542MHz
Band: UHF
Operating Range Under Typical Conditions: 300' (92 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response: (+/-3 dB) 60 Hz ~ 16 kHz
Total Harmonic Distortion: (+/-30 kHz deviation 1 kHz tone): <1%
Dynamic Range: >90 dB A-weighted
Operating Temperature Range: 14 degrees F to 122 degrees F (-10 degrees C to 50 degrees C), battery characteristics may limit this range
Audio Output Level: (+/-30 kHz deviation, 1 kHz tone)
XLR Connector (into 600 Ohms load): -12 dBV
1/4" Connector (into 3 k Ohms load): -18 dBV
Output Connections: 1 Male XLR Balanced, 1/4" Balanced
Output Impedance: XLR connector 200 Ohms; 1/4" connector 1 k Ohms
XLR Output: Pin 1: Ground (cable shield), Pin 2: Audio +, Pin 3: No Audio -
Sensitivity: -93 dBm for 30 dB
Image Rejection: >90 dB
Casing: Metal Chassis EIA STANDARD 1 U
Dimensions: 1.7" x 8.3" x 6.3" (44 x 212 x 160 mm)
Weight: 31 oz (880 g)
Power Requirements: 12-18 V DC at 300 mA, supplied by external power supply