Fryette PS-100 Power Station One Hundred Integrated Reactance Amplifier

An easy-to-use power attenuator, the Fryette PS-100 features two sets of volume, presence and depth controls for maximum performance and flexibility.

The Fryette Power Station 100 Dual-Mode Reactance Tube Amplifier is an easy-to-use power attenuator for controlling the volume of high-powered tube amplifiers with none of the drawbacks of a conventional attenuator. The PS-100 features two sets of remote foot-switchable front panel Volume, Presence and Depth controls for maximum live performance flexibility, and a powerful Dual 6550 100W Mono-Block for unparalleled punch and dynamic range.

If you've ever used a traditional Power Attenuator, you have already experienced the loss of tone and dynamics of your amplifier at various volume settings, and the frustration with the rotary level switch that always seems one step too loud or one step too quiet.

The Silent Mode feature provides a versatile reactive load for silent recording using low- or high-powered tube amplifiers. In Silent Mode, the balanced XLR Out and unbalanced Line Out remain operational even with the AC power disconnected.

Note: Unit should remain powered on when used with high-powered amplifiers to maintain safe operating temperatures.

The Power Station 100 provides a variety of performing and recording solutions for every kind of playing or performing application/environment and breathes new life and functionality into any amp, large or small.

Features:

- Preserves tube amplifier tone at any volume setting down to whisper level
- Preserves and enhances the dynamic feel and speaker response at any volume
- Maintains natural speaker/power amplifier read more interactive behavior
- Two sets of remote foot-switchable Volume, Presence and Depth controls for maximum live performance versatility
- Post-distortion Foot-Switchable Effects Loop provides a 100% analog signal path
- Balanced XLR and Unbalanced 1/4” Adjustable Line Outputs for direct recording or live performance signal processing
- True Impedance Matching, including 2/4, 8 or 16 ohms for both the amplifier and cabinet to optimize sonic performance while preventing damage to your amplifier
- Remote bypass function using the Power Station Remote accessory (sold separately)
- Completely safe for any tube amplifier
- A powerful re-amping tool
- As a re-amper, the Power Station breathes new life and utility into your favorite gear. Now any small amp, preamp or modeler can cut a live gig with a full band
- Crank a mini amp to the threshold of destruction, then adjust the Power Station to preserve the original tone or create an entirely new identity for it
- Perfect as mono power amplifier for guitar preamps, floor preamps and modeling preamps
- Ideal as an effects power amp for a Wet/Dry amp rig or a monitor power amp for live modeling direct to FOH
- Great as a desktop power amp for adding tube power to direct recordings for any instrument or signal source
- Protect your delicate vintage mics by keeping speaker cabinet volume low in the studio
- No A/D/A conversion, therefore NO latency
- Silent Mode
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

Front panel controls:
- Select Switch - Footswitchable
- 2 sets of: Volume, Presence and Depth
- Hi Voicing Switch - Flat, Brite, Edge
- Lo Voicing Switch - Flat, Warm, Deep
- Standby Switch (Bypass)
- Power Switch

Rear panel features:
- Footswitch Jack (1/4" TRS) for Select function (tip) and FX Loop function (sleeve)
- Amp In
- Amp Impedance Select - 4/8/16 Ohms
- Speaker Out
- Speaker Impedance Select 4/8/16 Ohms
- Line Out (balanced XLR)
- Line In (unbalanced 1/4")
- Line Out (unbalanced 1/4")
- Line Out Level Control (controls the 1/4" and XLR Out)
- FX Send
- FX Return
- FX Level Switch
- Ground Lift
- ains Fuse
- AC Input

Dimensions (WxHxD): 14" x 3.6" x 9" (35.5 x 9.1 x 23 cm)
Weight: 16 Lbs (7.3 kg).

Tube Complement:
- 2 X 6550 (Matched pair)
- 1 X 12DW7/ECC832

POWER REQUIREMENT: 300W

POWER AMP OUTPUT: 100W RMS @ 5% THD, 1kHz sine into 8Ω

INPUT IMPEDANCE: 2/4Ω/8Ω/16Ω (selectable)

OUTPUT IMPEDANCE: 2/4Ω/8Ω/16Ω (selectable)

FUSE:
- 100V-120V UNITS: T4A, 125/250V
- 220V-240V UNITS: T1.6A, 250V.

Load Amp Power Input (Max Continuous):
- 200W @ 4 Ohms
- 150W @ 8 Ohms
- 200W @ 16 Ohms
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 19.5 lbs
Shipping Dimensions: 19 x 14 x 8 in
Manufacturer Part Number (MPN): PS-100

For support or warranty questions, please contact the manufacturer:
Phone: 818-980-2800
Email: support@fryette.com
Web: https://www.fryette.com/support/

Reviewers gave this product an overall rating of 5 out of 5 stars. (1 ratings)
Submitted October 23, 2021 by a customer from yahoo.com

"PS100 is just awesome!"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
My first tube amp was a VHT Pitbull combo back in the 90's. I am pretty picky about tone and have owned several attenuators over the years which do not truly capture the nuances of a tube amp. I just received the PS100 and started using it on my Bogner Helios and an Engl E646. Two different style amps which sound different turned up just below half way. I cannot be more happy with the way it attenuates and preserves my amp tone. Thank You so Much!!
3 of 3 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

New

$1,199.00
  • 12 x  
    $99.92
  • 8 x  
    $149.88
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to