Fluid Audio FX50 Powered Studio Monitor

Enjoy accurate sound with the Fluid Audio FX50. The contoured baffle design and the dual concentric driver ensure that your mix sounds good on any speaker.

$149.00

  • No Credit Check
    6 x  
    $24.83
  • No Credit Check
    4 x  
    $37.25

Fluid Audio C5BT Powered Bluetooth Studio Monitors

No longer available at zZounds
Pair the Fluid C5BT studio monitor speakers to your Bluetooth device -- or plug into them via TRS 1/4" analog, RCA analog, or TOSlink optical digital inputs.

Fluid Audio's C5BT is an affordable Bluetooth-enabled monitor, and, like its big brother the BT5, uses CSR BT 4.0 technology with aptX support. aptX has revolutionized the Bluetooth Stereo listening experience by significantly reducing the bit rate without affecting audio quality or introducing latency issues. With a bit-rate of 384 kbit/s @ 16/48kHz, the aptX audio codec source material is transparently delivered over the Bluetooth link, whether it is stored uncompressed or in an alternative compression (MP3, AAC, FLAC) format.

Features:

- 5-inch low-frequency transducer and a 1-inch PEI diaphragm tweeter mounted to a specially designed waveguide to create a better off-axis response.
- The top panel sports the digital volume control, Bluetooth pairing button and input selector.
- The rear panel houses the round bass-reflex port and hosts balanced 1/4" TRS, unbalanced RCA inputs, 1/4" balanced TRS subwoofer output and optical toslink connection.
- Protection features include RF interference, output current limiting, over-temperature, turn-on/off transient and subsonic filter protection.

- Frequency response: 54 Hz - 22 kHz
- Crossover frequency: 4.5 kHz
- Amplifier power: 2 x 20 watts (40W total)
- Signal-to-noise: > 90 dB (typical A-weighted)
- Polarity: Positive signal at + input produces outward LF one displacement
- Input impedance: 20 k ohms balanced, 10 k ohms unbalanced
- Input sensitivity: 85 mV pink noise input produces 85dBA output SPL @ one meter with volume control at maximum (97dB Max SPL)
- Power: Fixed 110V ~50/60 Hz or 220V~50/60 Hz
- Protection: RF interference, output current limiting, over temperature, turn-on/off transient and subsonic filter
- Cabinet: Vinyl-laminated MDF
- Dimensions (single monitor): (H x W x D) 256 x 174 x 193 mm
- Weight (pair monitors): 9.5 lbs. (4.3 kg)

For support or warranty questions, please contact the manufacturer:
Web: https://www.fluidaudio.com/support_request/