EMG DG20 David Gilmour Pre-Wired Pickguard

Install this pickguard pre-wired with EMG SA single-coil pickups, an EXG Guitar Expander, an SPC Presence Control, and master volume -- just like Gilmour's.

EMG DG20 David Gilmour Pre-Wired Pickguard

$329.00

8 x
$41.13
No Credit Check

6 x
$54.83
No Credit Check

4 x
$82.25

FREE delivery Saturday

EMG ST-54 AlNiCo 2 Prewired Stratocaster Pickguard Set

No longer available at zZounds

Loaded with a trio of Alnico 2 single-coil pickups, this EMG ST-54 prewired pickguard is the perfect drop-in upgrade for modding your favorite Stratocaster.

Overview

The EMG ST-54 pickguard is loaded with pickups featuring Alnico 2 magnets for an alternative to classic Strat tone. Alnico 2 magnets provide a warmer and fatter low-frequency response.

They also have a more pronounced mid-range for a smoother flow from the lows to mids. Although Alnico 2 features a lower resonance, it has a higher Q resulting in a sharper high end. Alnico 2 also gives a different feel and attack. They have half the magnetism of a typical Alnico 5 magnet, giving the Strat player a nice "squish."

Both the Alnico 2 pickups are built in the traditional fashion with original style construction, but feature a two pin connector for easy installation & tinkering.

Made in California, both passive systems are on a three ply, 11 hole pickguard with a 5 position switch, master volume and tone controls on the neck and middle positions. The pickguards are available in black on black or white on white, giving them a classic and clean look that matches their tone.

Specs

- Model: ST-54
- Logo Color: Gold, Gold
- Magnet Type: Alnico 2
- Gauss at Pickup top: 580, 1000
- Inductance (Henries): 3.20, 2.65
- DC Resistance (KOhm): 6.82, 6.82
- Resonant Frequency (KHz) / Q (1): 3.15 / 1.75 3.40 / 1.56
- Resonant Frequency (KHz) / Q (2): 3.25 / 2.09 3.50 / 1.92
- Resonant Frequency (KHz) / Q (3): 4.25 / 2.61 4.75 / 2.29
- Impedance at Resonance (KOhm)(1): 63.9, 56.5

Notes:
-- (1) Loaded with 250K Volume and Tone and a 20' (6M) 580pF Cable
-- (2) Loaded with 250K Volume Control only and a 20' (6M) 580pF Cable
-- (3) Loaded with 1 MegOhm / 47pf

Installation notes:
-- The tools you will need for the installation are a #1 Phillips screwdriver, a small jewelers screwdriver (straight or phillips) and a 1/2-inch hex nut-driver. The Pickups and controls are pre- installed on an 11-Screw pickguard and should fit easily onto any Strat*-Style Guitar.