Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge

This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, New, Action Position Back
Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, New, Action Position Back
Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, New, Action Position Back
Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, New, Action Position Back
Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, New, Action Position Back Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, New, Action Position Back Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, New, Action Position Back Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, New, Action Position Back
With an 0.3 x 0.7 mil elliptical nude stylus to fit half-inch mount turntables, Audio-Technica's AT-VM95EN dual moving magnet cartridge is built to perform.

This Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws -- no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

The AT-VM95EN/Headshell combo kit includes the AT-VM95EN dual moving magnet cartridge pre-mounted on the AT-HS6BK headshell.

Features

- VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus
- Aluminum cantilever
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws -- no nuts required
- Compatible with any AT-VMN95 replacement stylus
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

- Frequency Response: 20-23,000 Hz
- Channel Separation: 22 (dB at 1 kHz)
- Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
- Stylus Construction: Nude round shank
- Recommended Load Impedance: 47,000 ohms
- Output: 3.5 mV (1 kHz, 5 cm/sec.)
- Channel Balance: 2.0 dB (1 kHz)
- Stylus Shape: 0.3 x 0.7 mil elliptical
- Cantilever: Aluminum pipe
- Mount: Half-inch
- Replacement Stylus: AT-VMN95EN
- Coil Impedance: 3.3 k ohms (1 kHz)
- DC Resistance: 485 ohms
- Load Capacitance: 100 to 200 pF
- Coil Inductance: 550 mH (1 kHz)
- Vertical Tracking Angle: 23*
- Dimensions: 17.2 mm (0.68") H x 18.9 mm (0.74") W x 28.3 mm (1.20") D
- Weight: 6.1 g (0.22 oz)
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 0.08 lbs
Shipping Dimensions: 4 x 3 x 1 in
Manufacturer Part Number (MPN): AT-VM95EN
and Headshell Kit
Shipping Weight: 0.25 lbs
Shipping Dimensions: 5 x 3 x 2 in
Manufacturer Part Number (MPN): AT-VM95EN/H

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

Be the first to rate and review this product.

New

$119.00
Easy Payment Plans, No Interest (Ever)
Reserve Now
Preorder Today
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to
Special Return Conditions