Audio-Technica AT-LP60XUSB Belt-Drive Turntable

No longer available at zZounds
Convert your vinyl records to digital with this turntable's USB output -- or plug in powered speakers to the built-in phono preamp to enjoy them out loud.

With the Audio-Technica AT-LP60XUSB fully automatic belt-drive turntable you can experience your vinyl’s high-fidelity audio directly or convert it to digital. The AT-LP60XUSB plays both 33-1/3 and 45 RPM records and is equipped with a USB output that allows direct connection to your computer. Just download the free Mac- and PC-compatible Audacity recording software (or software of your choice) and start converting your records to digital audio files. In addition to the USB output, the turntable is also equipped with a detachable RCA output cable (3.5 mm male to dual RCA male) and a built-in switchable phono preamp so you can connect directly to your home stereo, powered speakers, computer and other components, whether they have a dedicated phono input or not.

This updated version of the AT-LP60-USB features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60XUSB’s Dual Magnet cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup.
The turntable comes with a 45 RPM adapter and a removable hinged dust cover.

Features:

- Experience your vinyl’s high-fidelity audio directly or convert it read more to digital
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- Anti-resonance, die-cast aluminum platter
- Redesigned tonearm base and headshell for improved tracking and reduced resonance
- Integral Dual Magnet phono cartridge with replaceable diamond stylus (ATN3600L)
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Built-in switchable phono pre-amplifier for phono- or line-level output
- Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice)
- Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover
read less

- Type: Belt drive turntable, fully automatic
- Motor: DC servo-controlled
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable Platter: Aluminum
- Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz (JIS)
- Signal-to-Noise Ratio: >50 dB (DIN-B)
- Output Level: Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec
- Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
- Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
- Power Supply Requirements: 120V AC, 60 Hz, 3W
- Dimensions: 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D
- Accessories Included: 1.9 m (6.2') USB cable; 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable; 45 RPM adapter; removable hinged dust cover
- Replacement Stylus: ATN3600L

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer