Audio-Technica ATH-DSR7BT Wireless Over-Ear Headphones

Running on a purely digital circuitry with no need for a digital-to-analog converter, these wireless headphones provide an extremely clear response.

The Audio-Technica ATH-DSR7BT Wireless Over-Ear Headphones gift your ears with Digital Sound Reality. These innovative headphones feature Audio-Technica's Pure Digital Drive system, allowing them to operate without the sound-degrading D/A converter found in conventional wireless headphones. By utilizing Trigence Semiconductor's Dnote chipset, the ATH-DSR7BT headphones are capable of receiving a Bluetooth wireless transmission, processing the digital audio signal and transferring it to the drivers where the digital pulses of the chipset move the voice coil and diaphragm forward and backward to create the sound waves heard by the listener.

The Pure Digital Drive system likewise depends on re-engineered 45 mm True Motion Drivers, which feature specially designed diaphragms and lightweight, bobbin-wound voice coils to deliver incredibly nuanced, high-resolution sound reproduction. A pair of acoustic resistors controls the airflow in front of and behind the diaphragm to ensure a natural, balanced sound, and the entire driver assembly is housed within a layered aluminum structure that minimizes unwanted resonance and isolates the electric circuitry from the housing's acoustic space, resulting in optimal phase and transient response.

The Pure Digital Drive system also enables the ATH-DSR7BT to overcome the sonic limitations of conventional Bluetooth wireless transmissions by supporting the 24-bit/48kHz Qualcomm aptX HD codec. (aptX, AAC and SBC codecs are also supported.) The headphones read more can reproduce Hi-Res Audio when connected to a computer or other digital playback device via the included 2.0 m (6.6') USB cable.

The ATH-DSR7BT is equipped with a microphone, volume control and simple tap control for answering/ending calls and playing/pausing music on a smartphone or other device. Three LED indicators allow you to easily monitor pairing and charging status, battery level, and the codec currently in use. The headphones' internal lithium polymer battery provides approximately 15 hours of continuous use (up to 1000 hours in standby mode) and can be recharged using the included USB Cable.

Features:

- Exclusive Pure Digital Drive system keeps audio signal completely digital from source to driver for exceptionally pure sound
- Dnote chipset controls driver amplitude directly with digital signals -- no D/A converter required
- Compatible with Qualcomm aptX HD, aptX, AAC and SBC codecs, enabling wireless transmission with a resolution up to 24-bit/48kHz
- Exclusive 45 mm True Motion Drivers, featuring bobbin-wound voice coil, top-mounted printed circuit board and specially designed diaphragm, provide rich, detailed audio reproduction
- Housing's dual-layer isolation structure keeps the electric circuitry separate from the acoustic space for optimal phase and transient response
- Acoustic resistor controls airflow inside the diaphragm housing to yield a natural sound
- Mic and volume/control switch are built into the ear cup for convenient control of smartphones and other Bluetooth wireless devices
- NFC (Near Field Communication) functionality enables touch pairing with NFC-compatible Bluetooth wireless technology devices
- Remembers the last eight Bluetooth wireless devices paired
- LED indicators in the ear cup display pairing and charging status, battery level, and the codec currently in use
- Ultra-comfortable, soft, memory foam ear pads and headband
- Internal battery provides approximately 15 hours of continuous use (1000 hours on standby) on a full charge
- Includes a 2.0 m (6.6') USB cable, for charging and Hi-Res Audio playback, and a carrying pouch
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

- Type: Dynamic
- Driver Diameter: 45 mm
- Frequency Response: 5 - 40,000 Hz
- Sensitivity: 100 dB/mW
- Impedance: 35 ohms
- Battery: 3.7V rechargeable lithium polymer battery
- Battery Life: Approx. 15 hours continuous use (1,000 hours standby)
- Charging Time: Approx. 4 hours (for 0-100% charge) depending on environmental conditions
- Weight: 300 g (10.6 oz), without cable
- Accessories Included: 2.0 m (6.6') USB charging cable, carrying pouch
- Type (Microphone): condenser
- Sensitivity (Microphone): -44 dB (1V/Pa a 1 kHz)
- Frequency Response (Microphone): 50 - 4,000 Hz
- Polar Pattern (Microphone): omnidirectional
- Input jack: Micro USB Type B
- Communication System: Bluetooth Version 4.2
- Output: Bluetooth Specification Power Class 2
- Maximum Communication Range: Line of sight - approx. 10 m (33')
- Compatible Bluetooth Profiles: A2DP, AVRCP, HFP, HSP
- Support Codec: aptX HD, aptX, AAC, SBC
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 2.5 lbs
Shipping Dimensions: 10 x 9 x 4 in
Manufacturer Part Number (MPN): ATH-DSR7BT

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

New

$198.95
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to