Shure MX150 Subminiature Lavalier Microphone
No longer available at zZounds
Hide the tiny Shure MX150 lavalier mic on your lapel or collar. Its clip-on design makes for easy placement for on-camera interviews or stage presentations.
Overview
The Shure Microflex MX150 is a professional electret lavalier condenser microphone ideal for applications requiring low-profile placement.
Fully compatible with all Shure wireless systems, the discreet MX150 offers uncompromising sound quality and high reliability for television broadcasting, corporate lectures, A/V teleconferencing, houses of worship, and sound reinforcement.
- CommShield(r) Technology guards against interference from cellular RF devices and digital bodypack transmitters
- Matte black, sleek design for inconspicuous placement
- Multi-position tie clip allows for a variety of placement options and features an integrated cable management system for convenient cable dress with minimal handling noise
- Kevlar(r)-reinforced soft-flex cable design further reduces handling noise while providing superior flexibility for routing and placement
- User-changeable equalization caps for response shaping (omnidirectional only)
- Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility
- Legendary Shure quality, ruggedness, and reliability
Fully compatible with all Shure wireless systems, the discreet MX150 offers uncompromising sound quality and high reliability for television broadcasting, corporate lectures, A/V teleconferencing, houses of worship, and sound reinforcement.
Features
- Available in cardioid or omnidirectional polar patterns and TQG (for use in Shure bodypacks) or wired XLR variations- CommShield(r) Technology guards against interference from cellular RF devices and digital bodypack transmitters
- Matte black, sleek design for inconspicuous placement
- Multi-position tie clip allows for a variety of placement options and features an integrated cable management system for convenient cable dress with minimal handling noise
- Kevlar(r)-reinforced soft-flex cable design further reduces handling noise while providing superior flexibility for routing and placement
- User-changeable equalization caps for response shaping (omnidirectional only)
- Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility
- Legendary Shure quality, ruggedness, and reliability
Specs
Transducer Type: Electret condenser
- MX150/O: Omnidirectional
Frequency Response: 20 to 20,000 Hz
- MX150/O: TQG: N/A, XLR: 165.0Ohm
- TQG: -51.0 dBV/Pa (3.0 mV)
- XLR: -39.0 dBV/Pa (11.0 mV)
MX150/O:
- TQG: -46.5 dBV/Pa (4.5 mV)
- XLR: -34.5 dBV/Pa (19.0 mV)
- TQG: 147.5 dB SPL
- XLR: 129.5 dB SPL
MX150/O:
- TQG: 143.0 dB SPL
- XLR: 125.0 dB SPL
- TQG: 57.5 dB
- XLR: 57.0 dB
MX150/O:
- TQG: 60.0 dB
- XLR: 59.5 dB
- TQG: 111.0 dB SPL
- XLR: 92.5 dB SPL
MX150/O:
- TQG: 109.0 dB SPL
- XLR: 90.5 dB SPL
- TQG: 36.5 dB
- XLR: 37.0 dB
MX150/O:
- TQG: 34.0 dB
- XLR: 34.5 dB
- Operating Temperature Range: -18*C (0*F) to 57*C (135*F)
- XLR: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- XLR: 11-52 V DC phantom power (IEC-61938), < 2.2 mA
- XLR: 121 g (4.3 oz.)
Polar Pattern:
- MX150/C: Cardioid- MX150/O: Omnidirectional
Frequency Response: 20 to 20,000 Hz
Output Impedance:
- MX150/C: TQG: N/A, XLR: 165.5Ohm- MX150/O: TQG: N/A, XLR: 165.0Ohm
Sensitivity (open circuit voltage, @ 1 kHz, typical)
MX150/C:- TQG: -51.0 dBV/Pa (3.0 mV)
- XLR: -39.0 dBV/Pa (11.0 mV)
MX150/O:
- TQG: -46.5 dBV/Pa (4.5 mV)
- XLR: -34.5 dBV/Pa (19.0 mV)
Maximum SPL (1 kHz at 1% THD)
MX150/C:- TQG: 147.5 dB SPL
- XLR: 129.5 dB SPL
MX150/O:
- TQG: 143.0 dB SPL
- XLR: 125.0 dB SPL
Signal-To-Noise Ratio:
MX150/C- TQG: 57.5 dB
- XLR: 57.0 dB
MX150/O:
- TQG: 60.0 dB
- XLR: 59.5 dB
Dynamic Range @ 1 kHz
MX150/C:- TQG: 111.0 dB SPL
- XLR: 92.5 dB SPL
MX150/O:
- TQG: 109.0 dB SPL
- XLR: 90.5 dB SPL
Self-Noise (equivalent SPL, A-weighted, typical)
MX150/C:- TQG: 36.5 dB
- XLR: 37.0 dB
MX150/O:
- TQG: 34.0 dB
- XLR: 34.5 dB
- Operating Temperature Range: -18*C (0*F) to 57*C (135*F)
Polarity:
- TQG: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1- XLR: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Power Requirements:
- TQG: 5 V DC (0.04 - 0.18 mA)- XLR: 11-52 V DC phantom power (IEC-61938), < 2.2 mA
Weight:
- TQG: 21 g (0.7 oz.)- XLR: 121 g (4.3 oz.)
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com
Phone: 800-516-2525
Email: service@shure.com
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.