Seymour Duncan Killing Floor High-Gain Boost Pedal

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Seymour Duncan Killing Floor High-Gain Boost Pedal, Main
Seymour Duncan Killing Floor High-Gain Boost Pedal, Side
Seymour Duncan Killing Floor High-Gain Boost Pedal, Main Seymour Duncan Killing Floor High-Gain Boost Pedal, Side
There are boost pedals, and then there's the Killing Floor. Add up to a whopping 34dB to your signal and cut or boost highs for your ideal lead tone.

The Seymour Duncan Killing Floor High Gain Boost gives you both a volume boost and a musical amp-like overdrive all in one, with an unmistakable, undeniable bluesy feel. Use it to boost your overall output for solos, to push an amp further into overdrive, or for a beefy, expressive solo tone. It's also great as an 'always on' pedal for adding the finishing touch to your tone; it's like an overall enhancer for your entire sound.

The single control knob gives you up to a whopping 34 dB of additional gain for amazing range, from subtle boost to brash chords to a full, fat overdriven lead, while the 3-way Voicing toggle switch lets you sculpt your high end with a boost at 10K, a cut at 4.8K or a flat setting. Use this switch to take the bite out of overly bright single coils, put more sting into a dark humbucker or to add crystal clear, boutique-style airiness to your tone.
The Killing Floor is made in the USA and is True Bypass.

- Type of circuitry: The Killing Floor uses a hybrid J-FET/Op-Amp, optimized for low order harmonics
- Bypass: True hard-wire bypass
- Gain Control Range: 0dB to 34dB
- Voicing Switch:
- Up - High Boost, 7 dB @ 10 kHz
- Middle - Flat Response
- Down - High Cut, 1st order, -3dB @4.8 kHz
- Input Impedance: 1M Ohm
- Output Impedance: 1K Ohms
- Gain: Unity (0dB) dry; off to +3dB wet
- THD @ 1 Vo: Unity (0dB) dry; off to +3dB wet.
- Noise referred to input: 120dBV (with Gain set for 34dB)
- Power: 9V battery or external 9V to 18V Regulated DC Adapter (center negative)
- Current Consumption: 3.7mA in active mode, 2.2mA in bypass mode
- Dimensions: 2.61 x 4.90 x 1.40"
- Weight: 0.8lb. without battery, 0.9lb. with battery

For support or warranty questions, please contact the manufacturer:
Phone: 805-964-9610
Email: support@seymourduncan.com
Web: https://seymourduncan.zendesk.com
Manual

Reviewers gave this product an overall rating of 5 out of 5 stars. (1 ratings)
Submitted September 12, 2018 by Henry C in OKC, OK

"Wowowowowowowow"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
I've purchased amps all my life that had good distortion, but there was just something missing. Finally, I ended up owning an Engl Gigmaster 310 combo amp (Don't ask me how). The distortion was, again, good, but not great.Well this pedal, my friends, turns a Frankenstein into a Godzilla. This is super loud, or makes your amp super loud. Very saturated, rich distortion. Everything I've ever wanted. This won't be the best review ever but if you want something to kick your amp's distortion to the next level, this is the pedal. This is not a tube screamer... This is a tube annihilator. I mean my amp was fine after using this pedal... but you know what I mean.If I was playing a loud rock gig, I seriously could have used my little Engl combo in a stadium. That's how much it boosted and overall reshaped the distortion. Amazing pedal. Very highly recommend.

Musical Background:

Professional Rock Guitar Player

Musical Style:

Rock, blues, country, metal, heavy metal.
Did you find this review helpful?
Thanks for your opinion!
Rate and Review this Product
Read more reviews

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer