Railhammer G90 Gnarly 90 H90/P90 Electric Guitar Pickup

No longer available at zZounds
Hammer out grinding tones with this humbucker-sized P90 pickup. Poles under the unwound strings and a rail for the wound strings maintain even tonal balance.

The classic vintage P90 tone, has evolved to perfection and fits it into a standard size humbucker box with the G90 Gnarly 90 Electric Guitar Pickup. All the fat lower mids, raw attack, and greasy tone you'd expect, plus the tonal balance and enhanced response of the Railhammer design. And the full metal cover makes it much quieter (less hum) than a standard P90. Perfect for blues, classic rock, old school punk, or for any player looking for that vintage vibe but wants the Railhammer advantage. And like all Railhammers, the extra clarity on the low strings means they also work great with low tuned guitars.

Rails under the wound strings for tight clear lows

Thin rails sense a narrow section of string, reducing note smearing and muddiness. There's still plenty of low end, it's just more defined and less mushy. Aggressive fast riffs, complex chords, and palm muting are tight, clear and cut through the mix. Clean or dirty, standard or low-tuned, the clarity is beyond other pickups.

Poles under the plain strings for fat singing highs

Oversize 6mm diameter poles sense a wide section of string, increasing thickness and sustain. Slow bend, double stops, or fast shred, the tone stays fluid and soulful without any thin, nasty harshness.

Efficient magnetic structure

The rails/poles are larger than traditional polepieces, and have a very large surface area contacting the magnet. This produces a strong and wide magnetic field which is very touch sensitive and responsive to read more your playing technique. It also means no dead spots when you bend, even on the pole side.

Height tapered rails

The rails taper up, with the highest point under the D string. Volume of the D string is now increased, which is typically weaker. This gives you more consistent volume overall from string to string.

Six screw baseplate

A traditional baseplate has four screws securing the bobbins to the baseplate. Railhammer added two extra screws which reduces internal vibration, preventing uncontrollable feedback and squealing.

No moving parts

Non-adjustable poles, along with vacuum wax potted coils and the six screw baseplate, result in a solid pickup with no moving parts. Excess vibration of parts has been eliminated to avoid uncontrollable feedback and squealing. Another benefit is enhanced clarity and response, because when the parts don't vibrate, they more accurately sense string movement.

Universal spacing

The oversize poles and long rails cover a wide string spread, which means the spacing will work with just about any guitar in any position.
read less

Bridge:
- Model: G90-B
- K Ohms: 9.0
- Wire Gauge: 44
- Magnet: Alnico 5
- Rails: under wound strings for tight lows
- Poles: under plain strings for fat highs

Neck:
- Model: G90-N
- K Ohms: 8.0
- Wire Gauge: 44
- Magnet: Alnico 5
- Rails: under wound strings for tight lows
- Poles: under plain strings for fat highs

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer