Radial Elevator Multi-Level Booster and Buffer Pedal

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Radial Elevator Multi-Level Booster and Buffer Pedal, Main
Radial Elevator Multi-Level Booster and Buffer Pedal, Main
Elevate your guitar tone! Boost the signal to the front end of your amp for sparkling overdrive and keep long cable runs quiet with the unity gain buffer.

al tone and a smooth boost that generates beautiful creamy sustain.

On the ground floor, a selector switch lets you set the Elevator to true-bypass for those that prefer a direct feed to the amp when the boost is out of the circuit. Level-2 lets you activates a unity gain buffer that will drive the guitar signal to 15 meters (50') without noise. This also activates the Drag Control load correction circuit (Level-3). This replicates the 'tone and feel' as if connected directly to your amp yet eliminates problems such as tone loss due to cables or popping when switching with high gain amps. Level-4 activates a 'baseline' power booster that pushes the front end of the amp for more crunch and bite. This 'set & forget' control is particularly useful with vintage amps that do not produce the high gain effects of today's more modern designs. Level-5 is a variable power booster that delivers up to 15dB of pure gain for soloing. And Level-6 is a three-position mid boost switch lets you increase the mid range for added sustain.

Get an overview of the Radial Elevator Multi Level Booster and Buffer Pedal in this video demo:

For support or warranty questions, please contact the manufacturer:
Phone: 604-942-1001

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer