PreSonus ULT18 Powered Subwoofer Speaker

No longer available at zZounds
The matching sub for PreSonus ULT12 and ULT15 speakers, the ULT18 powered subwoofer pushes 2000 watts peak power through an 18" driver with a 4" voice coil.

Designed to complement any full-range PA loudspeaker and a perfect companion for the PreSonus ULT12 and ULT15, the ULT18 subwoofer delivers a powerful, clear, and accurate low-end punch. With 2,000 watts of Class D power and a direct radiating, ported enclosure, it delivers the detailed low-frequency performance audio pros demand. Its custom 18-inch low-frequency transducer with 4-inch voice coil provides 7 mm of driver travel before over-excursion to push more air and bring more thump. A variable lowpass filter (rare in this class) lets you dial in upper frequency limit. The ULT18 also offers M10 fly points, ground stacking provisions, castor provisions, and a defeatable front-panel LED, making it a great choice for both mobile and install applications.

Six Year Warranty

When you get ULT or AIR Loudspeakers, buy with confidence knowing your speakers are in it for the long haul. We take our build quality seriously, and if anything goes wrong with them in your first six years of ownership (assuming you don't throw them in a swamp or anything like that) the repair or replacement is on PreSonus.

Guaranteed.

Features:

Main Components:
- 18-inch custom Kevlar woofer with 4-inch voice coil
- 7 mm driver travel before over-excursion
- 2,000W Class D power (500 W continuous)
- Stereo Combo XLR and 1/4" inputs with direct outputs
- Onboard fully Variable Low Pass filter lets you dial in upper frequency limit

Controls:
- Output Level
- Lowpass Filter
- Preset Select
- read more Polarity Invert On/Off
- Mono On/Off
- Front LED On/Off

Convenience Features:
- Defeatable front-panel LED
- Rugged, texture-painted birch enclosures
- Tour-grade 16 gauge steel grille
- Comfortable ergonomic handles
- Ground Stacking provisions
- Integrated castor provisions (castor kit sold separately)
- Locking IEC connection
read less

Acoustic Performance:
- Configuration: Powered subwoofer, ported
- Frequency Response (-3 dB): 45 Hz - 250 Hz
- Maximum Peak SPL: 135 dB
- Crossover Frequency: 90 Hz

Transducer:
- LF Transducer: 1x18" Ferrite
- Voice Coil Diameter: 4"
Amplifier:
- Type: Class D
- Total Power Output: 2,000W Peak (1,000 RMS)
- LF Power: 2 x 500W bridged (1000W total)
- Cooling: Free air convection
- Rated THD: <0.05% (20 Hz - 20 kHz)
- Dynamic Range: 119 dB (A-weighted)
- Bandwidth: 20 Hz - 20 kHz

Connections and Controls:
- Input Channels: 2 line
- Input Connector Types: 2 combo
- Line Input Impedance: 10 kOhm
- Maximum Input: +22 dBu
- Output Connector: 2 XLR (M): Mix out, Direct out
- Controls: Output Level, Low Pass Filter, Preset Select, Polarity Invert On/Off, Mono On/Off, Front LED, On/Off
- Indicators: DSP Preset, Polarity Invert On/Off, Mono On/Off, Front LED On/Off, Signal, Clip, Thermal

DSP:
- Presets: Extended LF
- Polarity: Normal or Reverse
- Bit Depth: 24-bit
- Sample Rate: 96 kHz

Enclosure:
- Material: 18 mm Baltic birch
- Finish: Chemline polyurethane
- Grille: Powder-coated steel
- Dimensions (HxDxW): 22.5" x 24.5" x 25" (572 mm x 622 mm x 635 mm)
- Unit Weight: 95 lbs. (43 kg)
- Handles : 2 (One on each side)

Safety:
- Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
- Transducer Protection: Limiter

Power:
- AC Power Input: 100-230V~, 50-60 Hz
- AC Power Consumption (1/8 Power): 150W

Suspension Mounting:
- Rigging Points: 12 M10
- Mounting: Ground stack provisions

For support or warranty questions, please contact the manufacturer:
Phone: 225-216-7887
Web: https://support.presonus.com

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer