Moog Minimoog Model D Analog Synthesizer
Meet the new Minimoog Model D! Moog's update to their 1970s-era analog synthesizer adds a dedicated analog LFO, MIDI I/O, a mixer overload mod and more.
Moog Tolex Minimoog Voyager XL Analog Keyboard Synthesizer, 61-Key
No longer available at zZounds
Wrapped in black Tolex, this limited-run Voyager XL looks great and sounds better! Rock it old-school with Moog's all-analog signal path and CV I/O for days.
Overview
The Limited Edition Tolex XL is a 100-piece production of the Minimoog Voyager XL handcrafted in honor of the 50th anniversary of the Moog modular synthesizer. The traditional wood cabinet has been hand-wrapped in black tolex, just as the Model 15 modular synthesizer, and the chassis has been updated to parallel that of the original Moog modular synthesizers.
Incorporating virtually all of the sound resources and functions of the original Minimoog Model D and Voyager, The Minimoog Voyager XL features extensive front-panel patch-ability that harkens back to the original ground-breaking Moog modular synthesizers. A host of features previously found only on massive modular synthesizers combined with state-of-the-art analog technology make it a sound design and control dream machine.
The Minimoog Voyager XL Synthesizer is a monophonic analog performance and production synthesizer. Based on the Minimoog Voyager sound engine, it incorporates virtually all of the sound resources and functions of the original Minimoog Model D and Voyager, with the addition of a number of exciting features from Moog's modular synthesizer legacy.
- Ribbon Controller with Pitch and Gate CV Outputs
- Touch Surface Controller with X, Y, A and Gate Outputs
- External Audio Input
- Effects Loop Insert
- 2 Active Attenuators
- 4-Input CV Mixer
- Lag Processor
- Additional LFO Source with Multiple MIDI-Syncable Waveforms
- 3 Four-Way… read more Mults
- 20 Control Voltage Outputs
- 3 Gate Outputs
- 10 Control Voltage Inputs
- 4 Gate Inputs
- 2 Modulation Busses
- Solid Maple Cabinet
- Tilting Control Panel read less
Incorporating virtually all of the sound resources and functions of the original Minimoog Model D and Voyager, The Minimoog Voyager XL features extensive front-panel patch-ability that harkens back to the original ground-breaking Moog modular synthesizers. A host of features previously found only on massive modular synthesizers combined with state-of-the-art analog technology make it a sound design and control dream machine.
The Minimoog Voyager XL Synthesizer is a monophonic analog performance and production synthesizer. Based on the Minimoog Voyager sound engine, it incorporates virtually all of the sound resources and functions of the original Minimoog Model D and Voyager, with the addition of a number of exciting features from Moog's modular synthesizer legacy.
Features:
- 61-Note Velocity Sensitive Keyboard with After-Pressure- Ribbon Controller with Pitch and Gate CV Outputs
- Touch Surface Controller with X, Y, A and Gate Outputs
- External Audio Input
- Effects Loop Insert
- 2 Active Attenuators
- 4-Input CV Mixer
- Lag Processor
- Additional LFO Source with Multiple MIDI-Syncable Waveforms
- 3 Four-Way… read more Mults
- 20 Control Voltage Outputs
- 3 Gate Outputs
- 10 Control Voltage Inputs
- 4 Gate Inputs
- 2 Modulation Busses
- Solid Maple Cabinet
- Tilting Control Panel read less
Specs
- Sound Engine: 100% Analog
- Keyboard: 61-Note Velocity Sensitive Keyboard with after-pressure. Identical to the Voyager 44-note keyboard.
- Ribbon Controller: A 500mm Ribbon Controller is located on the middle wooden rail of the Voyager XL. It's center-point is lined up with 'middle-C' of the 61-note Keyboard. Outputs are sampled and available as CV-OUT (-5V to +5V) and GATE-OUT (0V to +5V).
- Control Voltage output: 20
- Keyboard Pitch (w/ internal trim to calibrate to 1 V/Octave)
- Keyboard Velocity
- Keyboard Afterpressure
- Touch Surface X
- Touch Surface Y
- Touch Surface A (area)
- Pitch Bend Wheel
- Mod Wheel
- MOD 1 signal (signal at MOD 1 input)
- MOD 2 signal (signal at MOD 2 input)
- LFO triangle wave
- LFO square wave
- Mod Wheel Mod Buss output
- Pedal/On Mod Buss output
- Filter Envelope
- Volume envelope
- Sample and Hold Step
- Sample and Hold Smooth
- Noise
- Ribbon Controller CV Output (-5V to +5V)
- Gate outputs: 3
- Keyboard Gate
- Touch Surface Gate
- Ribbon Controller Gate Output
- 4-way Mults (top jack is ring-powered): 3
- Control Voltage Inputs: 10
- Envelope Rate CV (-5V to +5V) Ring-Powered
- OSC Pitch CV (adj. to 1V/Octave) (-5V to +5V) Ring-Powered
- OSC Wave CV (all three osc. affected) ( 0V to +5V) Ring-Powered
- FILTER Cutoff CV (-5V to +5V) Ring-Powered
- VCA Volume CV ( 0V to +5V) Ring-Powered
- VCA Pan CV (-2.5V to +2.5V) Ring-Powered
- LFO Rate CV (-5V to +5V) Ring-Powered
- MOD Mod1 CV ( 0V to +5V) Ring-Powered
- MOD Mod2 CV ( 0V to +5V) Ring-Powered
- S&H CV (-5V to +5V) Ring-Powered
- Gate Inputs: 4
- ENV Release ON/OFF (0V OFF, +5V ON)
- ENV Gate Input (0V OFF, +5V ON)
- LFO Sync ON/OFF (0V OFF, +5V ON)
- S&H Gate Input (0V OFF, +5V ON) No footswitch input
- Active Attenuators: 2
- EXPRESSION PEDALS: can be connected to the Attenuator inputs (i.e. they are ring-powered inputs).
- AMOUNT: controls gain of -1 (CCW) to 1 (CW). Thus, the attenuators can create an inverted version of the waveform.
- OFFSET: control allows you to add a DC voltage of -5V to +5V to the input signal. The Attenuator output will be clipped to approximately +/-10V.
- Four-Input Mixer:
- Inputs 1 and 2 can be attenuated via front-panel knobs
- Inputs 1 and 3 can be controlled by Expression Pedals (i.e. ring-powered)
- Two output CV's (+) and (-)
- DC offset can be added to signal via OFFSET knob
- Overall output of MIXER can be adjusted via the MASTER knob
- Lag Processor: RISE and FALL time constants are adjustable from 1 millisecond to 1 second (middle is 100 millisecond).
- LFO 2: A MIDI-syncable second LFO source has been added to the Voyager XL. The default frequency range is 0.02Hz (50 seconds) to 20Hz (0.05 seconds). This range was made to augment the current Voyager LFO which does not go slow-enough for some very slow modulations.
- INPUTS: LFO 2 can be
- Free-running (adjusted by the RATE knob on the front panel)
- MIDI SYNC from external MIDI clock
- Directly CLOCKED from a GATE CV via the front panel CLOCK jack
- Controlled via external CV or Expression Pedal via the front panel RATE CV jack
- OUTPUTS: LFO 2 has two complementary LFO outputs labeled (+) and (-). In default mode, these are the same waveform 180 degrees out of phase.
- Available front-panel waveforms:
- TRIANGLE
- SQUARE
- RAMP
- SAW
- S&H
- S&H SMOOTH
- Power: Power input accepts a standard power cable. The Minimoog Voyager XL works from 100-250 VAC, 50-60 Hz.
- 12V Lamp: The TNC Lamp Socket provides 12VDC for a gooseneck lamp
- Keyboard: 61-Note Velocity Sensitive Keyboard with after-pressure. Identical to the Voyager 44-note keyboard.
- Ribbon Controller: A 500mm Ribbon Controller is located on the middle wooden rail of the Voyager XL. It's center-point is lined up with 'middle-C' of the 61-note Keyboard. Outputs are sampled and available as CV-OUT (-5V to +5V) and GATE-OUT (0V to +5V).
- Control Voltage output: 20
- Keyboard Pitch (w/ internal trim to calibrate to 1 V/Octave)
- Keyboard Velocity
- Keyboard Afterpressure
- Touch Surface X
- Touch Surface Y
- Touch Surface A (area)
- Pitch Bend Wheel
- Mod Wheel
- MOD 1 signal (signal at MOD 1 input)
- MOD 2 signal (signal at MOD 2 input)
- LFO triangle wave
- LFO square wave
- Mod Wheel Mod Buss output
- Pedal/On Mod Buss output
- Filter Envelope
- Volume envelope
- Sample and Hold Step
- Sample and Hold Smooth
- Noise
- Ribbon Controller CV Output (-5V to +5V)
- Gate outputs: 3
- Keyboard Gate
- Touch Surface Gate
- Ribbon Controller Gate Output
- 4-way Mults (top jack is ring-powered): 3
- Control Voltage Inputs: 10
- Envelope Rate CV (-5V to +5V) Ring-Powered
- OSC Pitch CV (adj. to 1V/Octave) (-5V to +5V) Ring-Powered
- OSC Wave CV (all three osc. affected) ( 0V to +5V) Ring-Powered
- FILTER Cutoff CV (-5V to +5V) Ring-Powered
- VCA Volume CV ( 0V to +5V) Ring-Powered
- VCA Pan CV (-2.5V to +2.5V) Ring-Powered
- LFO Rate CV (-5V to +5V) Ring-Powered
- MOD Mod1 CV ( 0V to +5V) Ring-Powered
- MOD Mod2 CV ( 0V to +5V) Ring-Powered
- S&H CV (-5V to +5V) Ring-Powered
- Gate Inputs: 4
- ENV Release ON/OFF (0V OFF, +5V ON)
- ENV Gate Input (0V OFF, +5V ON)
- LFO Sync ON/OFF (0V OFF, +5V ON)
- S&H Gate Input (0V OFF, +5V ON) No footswitch input
- Active Attenuators: 2
- EXPRESSION PEDALS: can be connected to the Attenuator inputs (i.e. they are ring-powered inputs).
- AMOUNT: controls gain of -1 (CCW) to 1 (CW). Thus, the attenuators can create an inverted version of the waveform.
- OFFSET: control allows you to add a DC voltage of -5V to +5V to the input signal. The Attenuator output will be clipped to approximately +/-10V.
- Four-Input Mixer:
- Inputs 1 and 2 can be attenuated via front-panel knobs
- Inputs 1 and 3 can be controlled by Expression Pedals (i.e. ring-powered)
- Two output CV's (+) and (-)
- DC offset can be added to signal via OFFSET knob
- Overall output of MIXER can be adjusted via the MASTER knob
- Lag Processor: RISE and FALL time constants are adjustable from 1 millisecond to 1 second (middle is 100 millisecond).
- LFO 2: A MIDI-syncable second LFO source has been added to the Voyager XL. The default frequency range is 0.02Hz (50 seconds) to 20Hz (0.05 seconds). This range was made to augment the current Voyager LFO which does not go slow-enough for some very slow modulations.
- INPUTS: LFO 2 can be
- Free-running (adjusted by the RATE knob on the front panel)
- MIDI SYNC from external MIDI clock
- Directly CLOCKED from a GATE CV via the front panel CLOCK jack
- Controlled via external CV or Expression Pedal via the front panel RATE CV jack
- OUTPUTS: LFO 2 has two complementary LFO outputs labeled (+) and (-). In default mode, these are the same waveform 180 degrees out of phase.
- Available front-panel waveforms:
- TRIANGLE
- SQUARE
- RAMP
- SAW
- S&H
- S&H SMOOTH
- Power: Power input accepts a standard power cable. The Minimoog Voyager XL works from 100-250 VAC, 50-60 Hz.
- 12V Lamp: The TNC Lamp Socket provides 12VDC for a gooseneck lamp
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 828-251-0090
Email: techsupport@moogmusic.com
Web: https://moogmusicsupport.zendesk.com
Phone: 828-251-0090
Email: techsupport@moogmusic.com
Web: https://moogmusicsupport.zendesk.com
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
Neumann U 87 Ai Large-Diaphragm Condenser Microphone with Shock Mount, Case and Cable
$3,750.00
- Interest-Free Payment Plans
Arturia AudioFuse Studio USB Audio Interface
$999.00
- 12 x$83.25
- 8 x$124.88
- No Credit Check6 x$166.50
- No Credit Check4 x$249.75
Gator GTSA-KEY61 TSA ATA Molded 61-Key Keyboard with Wheels
$399.99
- 8 x$50.00
- No Credit Check6 x$66.66
- No Credit Check4 x$100.00
