JBL PRX835 Powered Speaker (1500 Watts)

Cover a wide frequency response with the 3-way JBL PRX835. JBL's Differential Drive tech and Class D power help reduce the weight of this powerful speaker.

$1,609.00

  • 18 x  
  • 12 x  
    $134.08
  • 8 x  
    $201.13

JBL PRX735 3-Way Powered Loudspeaker (1500 Watts, 1x15")

No longer available at zZounds
With a sturdy wooden cabinet loaded with dedicated drivers for highs, mids and lows, JBL's PRX735 tri-amped powered PA speakers are ready to fill the room.

Based on the JBL PRX725, the JBL PRX735 powered loudspeaker adds a dedicated mid-range horn, creating a true 3-way, tri-amplified design. With highs, mids and lows each pushing their own speaker cone, this super-efficient loudspeaker creates more room for low-end power -- and is perfect for moving air on the dance floor!

Efficient 3-Way Speaker Design

The PRX735 pushes its 1500 watts through a JBL 15-inch Differential Drive woofer dedicated to low end, a 165 mm (6.5 in) horn-loaded transducer for the mid-range, and a JBL 1-inch annular polymer diaphragm neodymium compression driver for the highs. These speakers employ JBL's patented Differential Drive transducers with ferrite magnets, to maximize power amp efficiency for greater heat dissipation and increased power handling. To your ears, this means a system with maximum headroom and rich, deep bass response at any level.

Easy I/O

The I/O section on the PRX735 gives you two XLR-1/4" combo input jacks and balanced XLR output. A Mic/Line switch allows the system to work with whatever you're running into it. A single Level knob here puts the gain where you need it. Signal Present and Overload lights help you monitor system status.

JBL's Proprietary DSP Onboard

A proprietary DSP chip in each PRX speaker gives you selectable System EQ presets for Normal and Boost modes. Dynamic limiting and surge protection are built-in for a lifetime of worry-free performance.

Super Strong

The enclosure is constructed read more of reinforced plywood and coated with a rugged DuraFlex finish. The steel grille wraps around the sides of the enclosure so there are no protruding lips on the front of the box to create acoustical interference. The PRX735s remain compact and lightweight for their power rating, yet they're built to withstand all the rigors and hazards of the road.

Check out our exclusive demo of the JBL PRX735 3-Way Powered Loudspeaker:


Features:

- 136 dB peak SPL
- 15" Differential Drive(R) low-frequency driver for low distortion and higher SPL
- 165 mm (6.5 in) horn loaded midrange transducer
- 1.5" diameter next generation JBL neodymium compression driver
- JBL designed waveguide for accurate coverage
- Efficient Class-D amplifier technology
- Normal and Boost user selectable EQ presets
- DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
- Line level and direct microphone input capability
- Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
- Multiple injection molded handles with backing cup for easy transport
- Integrated M10 suspension points for easy setup
- Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL's tour proven DuraFlex(TM)finish.
- Cloth backed, dent-resistant 16 gauge steel grilles
read less

- Power Rating: 1500 W
- Frequency Range (-10 dB): Normal: 35 Hz - 20 kHz
- Boost: 34 Hz - 20 kHz
- Frequency Response (+/-3 dB): Normal: 42 Hz - 20 kHz
- Boost: 39 Hz - 20 kHz
- Coverage Pattern: 90* x 50* nominal
- Directivity Index (DI): 10.5 dB
- Directivity Factor (Q): 11.2
- Crossover Frequency: 480 Hz, 2.0 kHz
- Maximum SPL: Normal: 136dB
- Boost: 136dB
- Signal indicators: Limit: Yellow LED indicates peak output has been reached and dsp
- limiter is acting
- Signal: Green LED indicates signal present
- Power/Standby: Blue indicates system has power and ready to pass audio,
- Red indicates system has power but is in a power saving mode and will not
- pass audio.
- Dynamic Control (Input): dbx Type IV(TM) limiter circuit
- Input Impedance: 20K Ohms (balanced), 10K Ohms (unbalanced)
- LF Driver: 1 x JBL 275G 380mm (15 in) woofer
- MF Driver: 1 x JBL 196H 165mm (6.5 in) horn-loaded midrange transducer
- HF Driver: 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver"
- Enclosure: Trapezoidal, 18 mm, plywood
- Suspension / Mounting: 12 x M10 Suspension Points
- Transport: 2 x integrated handle with injection molded backing cup
- Finish: Obsidian DuraFlex(TM) finish
- Grille: Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
- Input Connectors: 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
- Output Connector: 1 male XLR balanced output
- Pole Socket Size: N/A (no pole socket)
- Dimensions (H x W x D): 952.5 mm x 445.0 mm x 537.97 mm
- (37.5 in x 17.52 in x 21.18 in)
- Net Weight: 34.9 kg (77 lb)

For support or warranty questions, please contact the manufacturer:
Phone: 800-336-4525
Web: https://jblpro.com/en/support for pro audio, https://support.jbl.com for consumer/home audio

JBL PRX735 3-Way Powered Loudspeaker

The JBL PRX735 is the next step in the highly successful PRX Series and introduces the first use of JBL's patented Differential Drive Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling. Powering the PRX735 is a 1500 Watt high performance, exceptionally low distortion tri-amplification system engineered to deliver clean power with maximum headroom to efficiently deliver smooth high frequencies and rich, deep bass response even at very high sound power levels. Compact, ultra-lightweight, the PRX735 uses JBL's tour tested technology throughout so you can trust it to deliver a lifetime of reliable performance.

Features:

- 136 dB peak SPL
- 15" Differential Drive low-frequency driver for low-distortion and higher SPL
- 165 mm (6.5 in) horn loaded midrange transducer
- 1.5" diameter next generation JBL neodymium compression driver
- JBL designed waveguide for accurate coverage
- Efficient Class-D amplifier technology
- Normal and Boost user selectable EQ presets
- DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
- Line level and direct microphone input capability
- Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
- Multiple injection molded handles with backing cup for easy transport
- Integrated M10 suspension points for easy setup
- Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL's tour proven DuraFlex(TM)finish.
- Cloth backed, dent-resistant 16 gauge steel grilles

Reviewers gave this product an overall rating of 5 out of 5 stars. (7 ratings)
Submitted April 22, 2016 by Darrell G in Houston, TX

"AWESOME"

Overall: 5 out of 5 stars
(see rating details)
Verified Customer zZounds has verified that this reviewer made a purchase from us.
I have been a mobile DJ for almost 20 years now and i have never heard a speaker that sounds quite like this one. My Bday was back in March and i decided to treat myself with a brand new DJ set up. OMG...OMG needs to be added to the model of these. i have yet to turn the speaker past the 1/4 mark. WOW. I was really speechless. The first day i tried just one out and it knocked down 2 different picture frames in my home. JBL has always been the way to go.

Musical Background:

DJ and Production

Musical Style:

Hip hop, RNB, Zydeco, etc
3 of 3 people (100%) people found this review helpful. Did you?
Thanks for your opinion!