EarthQuaker Devices Fuzz Master General Pedal

No longer available at zZounds
Get a load of different sounds out of this killer octave fuzz pedal! Switch between germanium, silicon, or no-diode clipping for a wide range of fuzz tones.

The Fuzz Master General is EQD's take on the vintage Ace Tone Fuzz Master FM-2 Professional fuzz machine, an octave fuzz that was very similar to the wildly popular Super Fuzz. They have taken the basic circuit and re-imagineered it to be more useful for the modern player. The Fuzz Master General features a more accurate Fuzz control that delivers a much broader spectrum of dirt tones ranging from nearly clean through full buzz saw assault. They added a "Voice" toggle to further enhance your dirt desires and wrangle a more variable tone out of the classic circuit. This toggle selects between germanium, silicon and no diode clipping. This has a huge impact on the characteristics of fuzz tone, upper octave clarity and output level. Germanium diodes offer more output and an open, looser fuzz tone while the silicon diodes compress the signal and yield a tighter fuzz tone. When the voice is set to no diode clipping (center position) you can attain a nearly clean upper octave that borders on ring modulation!

While the original Fuzz Master had a footswitch to select between two different tone settings, The Fuzz Master General has a variable tone control that allows you to dial in anything from a wide open treble assault to a super-scooped, bass heavy blast. It also has significantly more output volume and a much lower noise floor than the original, vintage unit. With all these added features, the Fuzz Master General delivers a more versatile version of the original while still retaining read more the same swelling octave grind we all know and love. Each Fuzz Master General is made by human hands in mostly tropical Akron, Ohio.

Features:

- Fuzz control
- Tone control
- Three way voice toggle switch
- Germanium clipping
- Silicon clipping
- Open, pure transistor drive
read less

- Fuzz: Turning this control clockwise creates more dirt.
- Tone: Darker and scooped tones clockwise. Bright and more open tones counter-clockwise.
- Level: Adjusts the output volume.
- Voice: Three way toggle switch which selects the clipping style.
- Mode 1: Germanium clipping. This produces a more open and looser fuzz.
- Mode 2: Silicon clipping. This produces a tighter, more compressed fuzz.
- Mode 3: Open, pure transistor drive. This produces a nearly clean octave-up effect and creates a sound very similar to ring modulation. Mode 3 is very loud; turn down the level when using this mode. To get the best octave effect, use the neck pickup and play above the 12th fret. This is an analog octave so single notes work best but full chords produce an awesome, destructive sound!
- Power: 9v Battery or any standard 9 volt DC power supply with a negative center 2.1mm barrel.
- Weight: 1 lb
- Dimensions: (L x W x H) 5 x 3 x 2

For support or warranty questions, please contact the manufacturer:
Phone: 330-252-9220
Email: info@earthquakerdevices.com
Web: https://www.earthquakerdevices.com