Eminence SC10-32 Bass Speaker (200 Watts)

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Eminence SC10-32 Bass Speaker (200 Watts), Main
Eminence SC10-32 Bass Speaker (200 Watts), Main
Load up your bass speaker cabinet with these 10" drivers for tight, powerful tone. The lightweight neodymium magnets make transporting your cab a breeze.

The Eminence Basslite SC10 is a 10" speaker optimized specifically for sealed bass cabinets. The ultra-light weight will take the weight out, but leave the performance in. Featuring a 4 oz. neodymium magnet and 2-inch voice coil, this 10-inch speaker is available in 16 and 32 ohms for your 4x10 or 8x10 rig.

"We wanted to design something that was designed specifically for sealed 4x10 and 8x10 cabinets." said Anthony Lucas, Design Engineer at Eminence. "We're offering them in 16 ohm and 32 ohm options as we envision them for multi-speaker configurations. The 16 ohm model has a program power rating of 300 watts, and the 32 ohm is rated at 200 watts."

Take an in-depth tour of the Eminence speaker factory:

- Nominal Basket Diameter: 10" (254 mm)
- Nominal Impedance: 32 O
- Program Power: 200 W
- Watts: 100 W
- Resonance: 47 Hz
- Usable Frequency Range: 50 Hz - 4.5 kHz
- Sensitivity: 94.2 dB
- Magnet Weight: 4 oz.
- Gap Height: 0.28" (7.1 mm)
- Voice Coil Diameter: 2" (51 mm)
- Resonant Frequency (fs): 47 Hz
- DC Resistance (Re): 25.1 O
- Coil Inductance (Le): 1.46m H
- Mechanical Q (Qms): 7.1
- Electromagnetic Q (Qes): 0.59
- Total Q (Qts): 0.55
- Compliance Equivalent Volume (Vas): 2.82 cu.ft. (79.97 liters)
- Peak Diaphragm Displacement Volume (Vd): 154 cc
- Mechanical Compliance of Suspension (Cms): 0.47 mm/N
- BL Product (BL): 17.32 T-M
- Diaphragm Mass Inc. Airload (MMs): 24 grams
- Efficiency Bandwidth Product (EBP): 80
- Maximum Linear Excursion (Xmax): 4.4 mm
- Surface Area of Cone (Sd): 350.1 cm2
- Maximum Mechanical Limit (Xlim): 9 mm
- Driver Volume Displaced: 0.03 cu.ft. (0.84 liters)
- Overall Diameter: 10.08" (256 mm)
- Baffle Hole Diameter: 9.18" (233.2 mm)
- Mounting Holes Diameter: 0.25" (6.4mm)
- Mounting Holes B.C.D.: 9.66" (245.4mm)
- Depth: 4.25" (108 mm)
- Net Weight: 3.5 lbs (1.59 kg)
- Coil Construction: Copper voice coil
- Coil Former: Polyimide former
- Magnet Composition: Neodymium magnet
- Core Details: Non-vented core
- Basket Materials: Pressed steel basket
- Cone Composition: Curved paper cone
- Cone Edge Composition: Cloth cone edge
- Dust Cap Composition: Solid composition felt dust cap

For support or warranty questions, please contact the manufacturer:
Phone: 502-845-5622

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer