Audio-Technica PRO-T302 Pro Series 3 Handheld Microphone Transmitter

No longer available at zZounds
Add a handheld vocal microphone to your A-T wireless system. This PRO T302 transmitter is designed to work with your Audio-Technica PRO R300 receiver.

The Audio-Technica PRO T302 Pro Series 3 Handheld Wireless Microphone Transmitter features a high quality unidirectional dynamic element and is compatible with the Pro Series 3 PRO R300 wireless receiver of a corresponding channel. Other features include a variable microphone trim control and easily accessible On/Standby/Off switch.

Features:
- Rugged unidirectional dynamic element on handheld microphone/transmitter
- Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters

Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.

- RF Power Output: 10 mW High position, 2 mW Low position, typical
- Dynamic Range: >=90 dB, A-weighted
- Microphone Element: Dynamic unidirectional
- Battery: 9V (NEDA type 1604) alkaline, not included
- Current Consumption: 30 mA typical
- Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position
- Dimensions: 9.50 inches long, 2.10 inches maximum diameter
- Weight: 12.7 oz (360 g) (without battery)
- Accessory Included: AT8456a Quiet-Flex stand clamp

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com