ADAM Audio A8H Active 3-Way Studio Monitor

With its three-way design, X-ART ribbon tweeter and multi-layer mineral (MLM) woofer, the ADAM Audio A8H delivers truly impressive, pro-studio sound quality.

$1,499.99

  • 18 x  
  • 12 x  
    $125.00
  • 8 x  
    $187.50

Adam Audio A8X-Sub12 Studio Monitor Bundle

No longer available at zZounds
Invest in a serious monitoring system for your control room. This no-compromises bundle includes two Adam A8X studio monitors and a powerful Adam Sub12 sub.

The Adam Audio A8X is the big brother to the A7X in more ways than a number. While they share the same legendary X-ART tweeter with all of the detail and imaging it is known for, the A8X adds low-end extension and clean SPL to 120dB. The Adam Audio A8X/Sub12 matched bundle extends the low-end to depths that will fill any control room with massive SPL EMOTION the talent will love and with the accuracy you expect from Adam Audio.

Adam Audio A8X

With its power and radiation characteristics, the A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5") midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a license to thrill.

Cabinet- and Bass Reflex-Construction
Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and Controls
With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (+/- 4dB) and two shelf read more filters for the high and low frequencies. There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Adam Audio Sub12

ADAM Audio subwoofers are designed with one primary goal in mind: achieving absolute accuracy and an authentic natural sound in the process of music reproduction. This means combining exceptional bass power with precision and clarity in every subwoofer. These elements are the perfect partners to complement the highly acclaimed clarity and transparency of ADAM monitors in the lower and lowest frequencies. All subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.

All subwoofers feature a level control (-60dB to +6dB), phase switch (180*) and a variable upper frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby(R) recommendations for theater sound and also to relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (,signal-on/ continuous').

The Sub12 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 22Hz.

A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.

The Sub12 subwoofer provides a precise combination of low cutoff frequency (-3dB at 22Hz) and an undistorted high sound pressure level (115dB SPL at 1m).

Note: Shown with IsoAcoustics speaker stands, sold separately.
read less

A8X

Mid-Woofer
- Number: 1
- Basket O: 8.5" (220 mm)
- Voice coil O: 1.5" (38 mm)
- Cone material: Carbon/Rohacell/Glass Fiber

Tweeter
- Number: 1
- Type: X-ART
- Diaphragm area: 4 inch (2420 mm)
- Equiv. Diaphragm O: 2" (56 mm)
- Velocity transform ratio: 4:1
- Diaphragm weight: 0.17 g

Built-in Amplifiers
- Mid-Woofer: 1
- Type: PWM
- Amp. power RMS / music: 150 W / 225 W
- Tweeter: 1
- Type: A/B
- Amp. power RMS / music: 50 W / 75 W

Control panel
- Input Sensitivity: -()() to +14 dB
- High shelve > 5 kHz: +/-6 dB
- Low shelve < 300 Hz: +/-6 dB
- Tweeter gain: +/-4 dB

Input connectors
- Analog: XLR / RCA

General data
- Frequency response: 38 Hz - 50 kHz
- THD 90dB/1m > 100 Hz: <=0.5 %
- Long term output: >=112 dB
- Max. peak: >=120 dB
- Crossover frequencies: 2300 Hz
- Input impedance: 30 KOhm
- Weight: 28.7 lb (13 kg)
- Magnetically shielded: No
- Height x Width x Depth: 15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
- Warranty: 5 Years

Sub12

- Basket O: 12" (310 mm)
- Voice coil O: 2" (50 mm)
- Cone material: Paper
- Amp. power RMS / music: 200 W / 300 W
- Input connectors: Analog XLR / RCA
- Frequency response: 22 Hz - 150 Hz
- THD > 60 Hz: =1 %
- Peak SPL max at 1m: =115 dB
- Crossover frequencies: 50 - 150 Hz
- - Input impedance: 10 KOhm
Weight: 57.3 lb (26 kg)
- Dimensions: (H x W x D) 23.5 x 14 x 17.5" (600 x 360 x 450mm
- Included: Power cord, Manual

For support or warranty questions, please contact the manufacturer:
Email: usa-info@adam-audio.com
Web: https://www.adam-audio.com/en/support/