Welcome to zZounds. Get free shipping on instruments and musical equipment, easy zero-interest payment plans, and top-rated service.
Customer Kudos
"Always reliable. Always a good price. No interest for twelve months. What's not to like?"
Search Results
-
Hosa MIT-129 Female TS 1/4" to XLR Male Impedance Transformer
No Hi-Z instrument jack? Use this impedance-matching transformer to plug a high-impedance 1/4" guitar or bass cord into your mixer's low-impedance XLR input.
-
Audix Boom-CG Cab Grabber Extension Boom Arm
Designed for use with the Audix CabGrabber or Cabgrabber XL the Boom-CG boom arm enables a wider variety of miking positions.
-
Audix D-Clamp Drum Microphone Clamping System with Gooseneck
Benefit from precise mic placement with the Audix D-Clamp drum mic clamping system. The gooseneck design and heavy-duty D-Clamp hold your mic in place.
-
Hosa MIT-435 XLR Female Lo-Z to 1/4" TS Hi-Z Transformer
Match impedances with this Lo-Z to Hi-Z transformer adapter. This connector steps up a microphone's signal, so you can plug into a high-impedance 1/4" input.
-
Audix SMT-MICRO Shock Mount Microphone Stand Adapter
Keep your microphone stable and eliminate unwanted noise with this sleek, low-profile shock mount -- a perfect fit for any Audix Micros series microphone.
-
Audix DVice Drum and Percussion Microphone Clip
Mount a mic in the perfect location for recording drums with a low profile drum and percussion mic by Audix. With this mount, drum miking is a snap.
-
Audix SMT19 Shock Mount Microphone Clip
Keep out unwanted noise and vibrations with this unique shock mount made for the Audix TM1, ADX51, SCX series, and any other microphone with a 19mm diameter.
-
Hosa ATT-448 Input Attenuator, XLR Female to XLR Male
With this 3-position switch on your dynamic microphone's XLR cable, it's easy for a louder singer/speaker to adjust their volume down by -20, -30 or -40 dB.
-
Hosa MIT-156 Impedance Matcher Transformer, XLR-3F to 1/8" TRS
You can plug an XLR microphone into a 1/8" stereo audio input when you add this impedance-matching adapter. It's ideal for connecting XLR mics to camcorders.
-
Audix PD133 Microphone Pop Filter
Keep plosive P-pops out of your recordings! This dual-layer nylon mesh pop filter includes a flexible metal gooseneck and a clamp to fit your mic stand.
-
Audix CA4231 Calibrator Adaptor for Audix TM1
Get the best sound level calibration possible by creating an air-tight seal for your TM1 with Bruel & Kjaer 4231 sound level calibrator or equivalent.
-
Audix D-VICE MICRO Mini-Gooseneck Mic Clamp
Position any Audix D Series microphone on the drum of your choice. This space-saving mini-gooseneck clamp attaches to the drum rim, right where you need it.
-
Audix T50K Impedance Matching Transformer
Give yourself plenty of options with this impedance-matching transformer. This high-to-low impedance adapter also conveniently converts an XLR to TS 1/4".
-
Audix SMT25 Shockmount Suspension for Small-Diaphragm Condenser Microphones
Securely suspend a small-diaphragm condenser microphone -- and prevent unwanted vibrations from sneaking into your recordings -- with this Audix shockmount.
-
Hosa MIT-176 XLR Female to Female TS 1/4" Impedance Transformer
Need to plug an XLR microphone into a guitar amp's 1/4" input? Use this impedance transformer to connect lo-Z XLR microphone cables to hi-Z instrument jacks.
-
Audix WSTM1 Threaded Acoustic Windscreen for TM1
Keep out that unwanted wind noise with this threaded windscreen for the Audix TM1. Because it's threaded, it won't fly off when there's a gust of wind.
-
Hosa MMH-346 Quad Microphone Holder
Put four mics within easy reach. This handy attachment accommodates up to four handheld microphones on a single mic stand -- keeping your stage neater.
-
Audix F50 Dynamic Handheld Vocal Microphone
Great for vocals, this workhorse cardioid dynamic microphone can handle high SPLs. And at this price point, everyone in the band can get their own vocal mic.
$49.00- No Credit Check4 x$12.25
-
Audix KD Heavy-Duty Telescoping Kick Drum Microphone Stand
Get a kick drum mic stand you can trust! The Audix KD stand is truly a heavy-duty build with easy-to-use positioning adjustment for precise pickup.
$49.00- No Credit Check4 x$12.25
-
Hosa MSB-382 Tripod Base Short Microphone Stand
Whether you're looking for a kick drum mic stand or just a flexible option, this stable and low-profile design will get the job done!
$54.95- No Credit Check4 x$13.74