Welcome to zZounds. Get free shipping on instruments and musical equipment, easy zero-interest payment plans, and top-rated service.
Customer Kudos
"zZounds make getting these guitars really easy. Their payment plan set up is the best and they have great customer service. I have purchased many items from zZounds and everyone was a home run!"
Search Results
-
QSC KLA12-TOTE Padded KLA12 Speaker Carry Bag
Carry around your QSC KLA12 speaker in this custom-fitted padded speaker bag. It includes a front pouch to store cables and other accessories.
$129.99
- No Credit Check6 x$21.66
- No Credit Check4 x$32.50
-
QSC KLA Pole Subwoofer Satellite Pole
Mount one or two QSC KLA12 loudspeaker boxes on a KLA181 subwoofer in a sub/satellite configuration with the QSC KLA mounting pole.
-
QSC GXD 8 Class D Power Amplifier with DSP (800 Watts)
This mighty power amp pushes 4500 watts total peak power! Tune your system with the QSC GXD 8's on-board DSP tools for crossover, EQ, delay, and limiting.
$1,049.99
- 18 x$58.33
- No Credit Check6 x$175.00
- No Credit Check4 x$262.50
-
QSC KLA-AF12 Array Frame for KLA Speakers
Build a line array and fly up to 5x KLA12 top boxes and 2x KLA181 subwoofers. QSC's KLA-AF12 array frame connects to the top of your QSC KLA loudspeakers.
$1,089.99
- 18 x$60.55
- No Credit Check6 x$181.66
- No Credit Check4 x$272.50
-
QSC RMX 850a Power Amplifier
An update to a time-tested QSC design, this RMXa-series power amp pushes 300 watts per channel at 4 ohms, with defeatable clip limiters and LF filters.
$699.99
- 12 x$58.33
- No Credit Check6 x$116.66
- No Credit Check4 x$175.00
-
QSC GXD 4 Class D Power Amplifier with DSP (400 Watts)
Get more out of your PA system with this smart power amp from QSC. Built-in DSP lets you adjust crossover, time-alignment delay, EQ, and limiter settings.
$699.99
- 12 x$58.33
- No Credit Check6 x$116.66
- No Credit Check4 x$175.00
-
QSC CP12YM Yoke Mount
Mount your CP12 powered speaker to a wall or beam using the specially designed CP12YM yoke mount from QSC. Includes hand-tighten knobs for quick setup.
$149.99
- No Credit Check6 x$25.00
- No Credit Check4 x$37.50
-
Celestion TF1225E Replacement PA Speaker (300 Watts)
Suitable for 2-way and 3-way systems, this replacement PA speaker from Celestion is designed to provide Ferrite magnet drivers.
$119.00
- No Credit Check6 x$19.83
- No Credit Check4 x$29.75
-
QSC TMR-01 TouchMix Rack Mounting Kit
Place your TouchMix-8 or -16 right in the core of your rig with this mounting kit. It fits into a standard 19" rack, giving you unprecedented mix control.
$109.99
- No Credit Check6 x$18.33
- No Credit Check4 x$27.50
-
QSC LA108-AF Array Frame for LA108 Loudspeaker
Deploy your QSC LA108 line array speaker in flown or ground-stack arrangements with the LA108-AF array frame.
$749.99
- 12 x$62.50
- No Credit Check6 x$125.00
- No Credit Check4 x$187.50
-
QSC CP8 Outdoor Speaker Cover
Don't let bad weather ruin your speakers! This nylon cover from QSC helps protect your CP8 speakers from the elements. Not for permanent outdoor use.
-
QSC CP12 Outdoor Speaker Cover
Be prepared for inclement weather! This cover for QSC CP12 speakers helps protect from moisture, while allowing access to rear connections and controls.
-
QSC RMX 1450a Power Amplifier
The RMX1450a power amplifier steps up the output to 300 watts/channel at 8 ohms; 1400 watts at 4 ohms bridged -- with the low distortion you expect from QSC.
$899.99
- 12 x$75.00
- No Credit Check6 x$150.00
- No Credit Check4 x$225.00
-
QSC GX3 Power Amplifier (300 Watts)
Get QSC quality on a real-world budget. The GX3 300-watt power amp has an onboard crossover to drive your sub, and GuardRail limiting to protect your PA.
$499.99
- 8 x$62.50
- No Credit Check6 x$83.33
- No Credit Check4 x$125.00
-
Celestion TF0818 Replacement PA Speaker (100 Watts)
Ideal for bass and mid-range sounds, this replacement PA speaker from Celestion is dependable and includes Kevlar-impregnated cones for reduced distortion.
$69.50- No Credit Check4 x$17.38
-
QSC TMR-2 TM-30 Pro TouchMix-30 Pro Rack Mount Kit
Ready to rack-mount your QSC TouchMix-30 Pro? Trust QSC's own rack mount kit to install your digital mixer on a standard 19" universal rack.
$99.99
- No Credit Check6 x$16.66
- No Credit Check4 x$25.00
-
QSC M10KitW M10 Eyebolt Kit for KW Series Speakers
Designed for QSC KW series speakers, this mounting kit lets you suspend your speakers above the crowd -- perfect for clubs, bars or other venues.
$71.39- No Credit Check4 x$17.85
-
QSC TM-30 Tote TouchMix-30 Pro Heavy-Duty Bag
Carry your QSC TouchMix-30 Pro from gig to gig in this custom-designed heavy-duty bag! With front pockets for extra storage, it holds your accessories too.
$134.99
- No Credit Check6 x$22.50
- No Credit Check4 x$33.75
-
QSC KLA181-COVER Padded Cover for KLA181 Subwoofer
This padded nylon bag fits perfectly over your QSC KLA181 subwoofer, protecting it from scratches and bumps as you take it to the venue.
$129.99
- No Credit Check6 x$21.66
- No Credit Check4 x$32.50
-
QSC KLA181 M10 KIT 4-Pack of M10 Eyebolts
Suspend your QSC speakers above the crowd for better coverage. This 4-pack of steel M10 eyebolts is the hardware you need to hang the QSC KLA181 subwoofer.