Welcome to zZounds. Get free shipping on instruments and musical equipment, easy zero-interest payment plans, and top-rated service.
Customer Kudos
"Super friendly and super helpful folks that gets you the right gear you need. I will be going through them again!"
Search Results
-
Shure ARPWC Case for Nexadyne RPW Microphone Capsule Head
This no-nonsense case protects your Shure wireless Nexadyne capsules from dirt, debris, or drops in a lightweight and sleek housing.
-
Shure ANXNC Case for Nexadyne Handheld Microphones
Transport and store your wired Nexadyne handheld microphone safely with this sturdy zipper case from Shure.
-
Shure AMVL-FUR Rycote Mini-Windjammer for MVL
Recording outdoors with a Shure MOTIV MVL lavalier mic? Add this mini-sized Rycote windscreen to protect your mic from wind noise and capture cleaner tracks.
-
Shure AMV88-FUR Rycote Windjammer for MV88
Recording outdoors with your Shure MOTIV MV88? Add this Rycote Windjammer furry windscreen to protect your microphone and keep wind noise out of your tracks.
-
Shure AMV6WS Foam Windscreen
Does your Shure MV6 mic have a few battle scars? Pop Shure's official replacement windscreen on your MV6 microphone to keep it looking great on stream.
-
Shure AMV-PC Phone Clamp and Microphone Clip for MV88 Plus
Made to fit the Shure Motiv MV88+ Video Kit, this genuine Shure replacement phone clamp and mic clip make it easy to mount your MV88+ microphone.
-
Shure A98D Drum Microphone Mount for Beta98 and SM98A
Designed for the Shure Beta 98 and SM98A drum microphones, this mount includes a gooseneck adapter for fast, flexible mic placement over a drum rim.
$70.95- No Credit Check4 x$17.74
-
Shure A96F Transformer Low Z Female XLR to Phono
Level up your camcorder sound with Shure! The Shure A96F interface uses a 3.5mm camcorder or recording device input and outputs that signal to an XLR.
$71.95- No Credit Check4 x$17.99
-
Shure A95UF Transformer
Give yourself the freedom to use long microphone cables with the Shure A95UF Transformer, which connects any mic to high- or low-impedance inputs.
-
Shure A95U Transformer
Convert 1/4" TS to XLR with no noise or hum! Connect any high- or low-impedance mic to any high- or low-impedance input with the Shure A95U transformer.
-
Shure A85F Transformer Low Z Female XLR to High Z
Need to plug an XLR microphone into a guitar amp input? Add this in-line transformer to convert a low-impedance XLR input to a high-impedance 1/4" TS output.
-
Shure A83W Foam Windscreen for Shure VP83/VP83F
A little foam goes a long way. This genuine Shure A83W replacement foam windscreen fits your Shure VP83 or VP83F shotgun mic, keeping wind noise at bay.
-
Shure A83-FUR Fur Windshield for Shure VP83/VP83F
Shooting outdoors? Protect your Shure LensHopper VP83 or VP83F shotgun microphone and reduce wind noise by -25 dB with this synthetic fur Rycote Windjammer.
$53.00- No Credit Check4 x$13.25
-
Shure A81WS Large Foam Microphone Windscreen
Using a Shure SM81 or SM57 microphone outdoors, or miking a vocal up close? Add the A81WS large foam windscreen to keep breath and wind noise under control.
-
Shure A7WS Replacement Windscreen for Shure SM7B Mic
Is your Shure SM7's windscreen wearing thin? Keep it protected with the Shure A7WS replacement windscreen -- a perfect fit for SM7, SM7A or SM7B microphones.
-
Shure A58WS Foam Windscreen
Color-code your microphones without coloring your sound! These foam filters reduce pops and wind noises on the Shure SM58, SM48 and other ball-type mics.
-
Shure A4SM Shockmount for SM4 Microphone
Capture the cleanest audio possible with a shockmount! Perfect for eliminating handling noise and low-end rumble, this shockmount was made for the SM4 mic.
-
Shure A4CC Softshell Carrying Case for Shure SM4 Microphone
Store your Shure SM4 mic, as well as its shockmount and pop filter in this custom-fit case, complete with foam padding and a carry handle.
-
Shure A2WS Locking Windscreen
Use a Shure locking windscreen on your 545 Series or SM57 mic to cut back on unwanted wind noise and external wind signals.
-
Shure A25D Microphone Clip
This break-resistant microphone clip from Shure is designed for the SM58, SM57, Beta 87A, the Beta 87C, and other mics with a 3/4" or larger handle.