21 products
Peavey IPR2 3000 Power Amplifier

Peavey IPR2 3000 Power Amplifier

The surprisingly lightweight IPR2 3000 boasts super-efficient class D topology. Rated for 525 watts RMS into 2 channels at 8 ohms, it doesn't skimp on power.

QSC RMX 5050a Power Amplifier

QSC RMX 5050a Power Amplifier

QSC upgraded their longtime live-sound staple RMX 5050 power amp to build the super-efficient 5050a -- capable of a huge 1800 watts per channel into 4 ohms. Note: Due to its high wattage capacity, this power amp comes with a 20 Amp power cable.

QSC PLX3602 Lightweight Power Amplifier
BACK IN STOCK

QSC PLX3602 Lightweight Power Amplifier

QSC's most powerful PLX power amplifier, the super-efficient PLX3602 is designed to drive big PA rigs with clean, consistent power -- even when pushed hard.

QSC GXD 8 Class D Power Amplifier with DSP

QSC GXD 8 Class D Power Amplifier with DSP

This mighty power amp pushes 4500 watts total peak power! Tune your system with the QSC GXD 8's on-board DSP tools for crossover, EQ, delay, and limiting.

Peavey IPR2 7500 Power Amplifier

Peavey IPR2 7500 Power Amplifier

Leave it to Peavey to build an insane, 3750-watts-RMS-per-channel power amp, complete with DDT speaker protection, in a package weighing under 15 pounds. Note: Due to its high wattage capacity, this power amp requires a 20 Amp outlet.

QSC PLD4.3 Power Amplifier, 4-Channel (3000 Watts)
BACK IN STOCK

QSC PLD4.3 Power Amplifier, 4-Channel (3000 Watts)

Part of QSC's PLD series, this power amp can drive 1, 2, 3 or 4 channels. Plus, it's loaded with DSP for alignment delay, crossover, parametric EQ and more.

QSC RMX 850a Power Amplifier

QSC RMX 850a Power Amplifier

An update to a time-tested QSC design, this RMXa-series power amp pushes 300 watts per channel at 4 ohms, with defeatable clip limiters and LF filters.

QSC GX7 Power Amplifier (1000 Watts)

QSC GX7 Power Amplifier (1000 Watts)

Trust the QSC GX7 power amp to drive your passive PA. No fancy bells and whistles here -- just 1000 watts of reliable QSC power for a practical price.

Peavey IPR2 2000 Power Amplifier

Peavey IPR2 2000 Power Amplifier

Deliver clean, consistent power to your PA with the super-efficient, lightweight IPR2. This power amp's proprietary DDT technology protects your speakers.

QSC PLX2502 Lightweight Power Amplifier
BACK IN STOCK

QSC PLX2502 Lightweight Power Amplifier

With QSC's efficient PowerLight power supply, the PLX2505 can push up to 4 speakers from each channel. It's also ideal for power-hungry bridged mono setups.

QSC RMX 4050a Power Amplifier

QSC RMX 4050a Power Amplifier

Rely on this workhorse QSC amplifier to power your passive PA system. With the super-efficient RMX 4050a, you get 1400 watts per channel into 4 ohms.

Peavey IPR2 5000 Power Amplifier

Peavey IPR2 5000 Power Amplifier

Get serious power from a impressively lightweight power amp! The IPR2 5000 weights only 7 pounds, yet pushes 890 watts RMS on two channels at 8 ohms.

QSC RMX 1450a Power Amplifier

QSC RMX 1450a Power Amplifier

The RMX1450a power amplifier steps up the output to 300 watts/channel at 8 ohms; 1400 watts at 4 ohms bridged -- with the low distortion you expect from QSC.

QSC RMX 2450a Power Amplifier

QSC RMX 2450a Power Amplifier

Part of QSC's workhorse RMX series of amplifiers, the 2450a offers ultra-low distortion in a cool-running design, powering 750 watts per channel at 4 ohms.

QSC PLD4.5 Power Amplifier, 4-Channel (5000 Watts)

QSC PLD4.5 Power Amplifier, 4-Channel (5000 Watts)

Spread your 5000 watts over 1, 2, 3 or 4 channels with this flexible QSC power amp. It's packed with smart DSP for your crossover, alignment delay, and more.

QSC PLD4.2 Power Amplifier, 4-Channel (2000 Watts)

QSC PLD4.2 Power Amplifier, 4-Channel (2000 Watts)

Packed with smart DSP for crossover, EQ, limiting, and more, the QSC PLD4.2 power amp can be configured to spread its 2000 watts over 1, 2, 3 or 4 channels.

QSC PLX3102 Lightweight Power Amplifier
ONLY 3 LEFT

QSC PLX3102 Lightweight Power Amplifier

Designed to drive up to four speakers from each amp channel, the efficient, lightweight QSC PLX3102 power amplifier features onboard subwoofer processing.

QSC GXD 4 Class D Power Amplifier with DSP

QSC GXD 4 Class D Power Amplifier with DSP

Get more out of your PA system with this smart power amp from QSC. Built-in DSP lets you adjust crossover, time-alignment delay, EQ, and limiter settings.

QSC PLX1802 Lightweight Power Amplifier

QSC PLX1802 Lightweight Power Amplifier

Power your passive PA system like a pro. Thanks to PowerLight technology, QSC's PLX1802 power amp provides clean output for up to 4 speakers on each channel.

QSC GX5 Power Amplifier (500 Watts)

QSC GX5 Power Amplifier (500 Watts)

Push your passive PA with a reliable QSC power amp for less. This 500-watt amp has a built-in 100 Hz crossover and GuardRail limiting to protect your system.

Please wait.