CM Automation Motormix Pro Tools Control Surface

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
CM Automation Motormix Pro Tools Control Surface
zZounds Gear Experts Say...
Small size. Console automation.

Moving Fader Remote Controller
Motor Mix™ stands alone as the only DAW mixer control surface to offer 8 bank-switchable motorized faders at an unbelievably low price. It also features 8 rotary pots, a rotary encoder, 68 switches, and a 40 by 2 LCD. Motor Mix™ is THE hands-on control surface to provide complete tactile control for a variety of audio needs, including:

Studio
Console Automation: Use the Motor Mix™ to enter fader moves and mutes into the sequencer to provide mixer automation.

Digital Audio Workstations: Connect Motor Mix™ to a computer-based Digital Audio Workstation. Use Motor Mix™ to enter fader moves and mutes into the DAW to control levels, mutes, and plug-in parameters in real-time with real controls instead of 'mousing' commands one-at-a-time on the computer screen. By using the bank select switches and the LCD, Motor Mix™ can control systems with an unlimited number of channels and many plug-ins in each channel. Motorized faders are the controls of choice used by professionals all over the world on the most expensive consoles. And Motor Mix™ brings them to you at a price anyone can afford!

Live Sound
Remote Mixing: Since Motor Mix™ is only 10 by 12 in., you can mix from any seat in the house!

Show Control: Connect Motor Mix™ to a show control system. Use the faders and mutes on Motor Mix™ to control virtually any show parameters.

Cascading: up to 4 Motor Mix Controllers can be cascaded in Protools

8 ea. 100mm long-life Motion Sensing Motorized faders for automated level control.

8 ea. high-quality rotary pots with display for control of Pan, Aux Sends, EQ, Time Delay, Dynamics, and other Plug-ins

2 ea. - 7-segment displays to display rotary pot function

1 Rotary encoder with push to control rotary post function

1 40 x 20 Backlit LCD with contrast control to display channel labels, rotary pot position, effects parameters, input/output assignments, and soft key control

8 MUTE Tactile Switches with Red LED Status Indicator

8 SOLO Tactile Switches with Green LED Status Indicator

8 REC/RDY Tactile Switches (5 alternate functions) with Red LED Status Indicator

8 Automation Enable Tactile Switches (8 Functions) with Green LED Status Indicator

8 Tactile Select Switches with Green LED for channel selection

8 "F" (function) keys with 8 shifted control purposes

8 System Keys for disk operations, window control, channel label setup, transport, and input/output assignments

"Group" and "Bank" switches with cursor keys to control as many channels as you wish in banks of 8 at a time

Easy communications setup

Accessory serial port for edit/transport controller

MIDI In and Out ports for full bi-directional communications with DAW

Small Size (W x D): 10-1/2 x 12-1/2 in. deep). Footprint not much larger than notebook paper

Attractive dual slope chassis design for best viewing and ergonomic feel.

Built-in low-noise power supply

For support or warranty questions, please contact the manufacturer:

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer