Shure MX202 Hanging Condenser Microphone
zZounds Gear Experts Say...
Perfect for reinforcing choir performances, this hanging cardioid condenser comes with an attached 30-foot cable and an in-line preamp with 3-pin XLR output.
Overview
It is hard to believe that such small, unobtrusive microphones as the Shure MX202 hanging condensers can produce such great sound, but it's true. Available in black or white finishes, with an in-line preamp, the MX202 Microflex Overhead condenser microphones capture high-quality sound in a compact, adjustable package.
This model features a cardioid microphone cartridge attached to a flexible, four-inch gooseneck with a 30-foot cable. The in-line preamp converts the MX202's TA4F mini-XLR locking connector to a standard 3-pin XLR output.
- Cardioid polar pattern
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Supplied stand-mount adapter for portable applications
- White or black finish that blends unobtrusively with most surroundings
This model features a cardioid microphone cartridge attached to a flexible, four-inch gooseneck with a 30-foot cable. The in-line preamp converts the MX202's TA4F mini-XLR locking connector to a standard 3-pin XLR output.
Features:
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum- Cardioid polar pattern
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Supplied stand-mount adapter for portable applications
- White or black finish that blends unobtrusively with most surroundings
Specs
Output Impedance: 180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*)
- Cardioid: -35.0 dBV/Pa (17.8 mV)
All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
- Cardioid: 124.2 dB
All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)
- Cardioid: 28.0 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
- Cardioid: 66.0 dB
Dynamic Range at 1 k ohm load
- 96.2 dB
- 100 dB at 0 gain
Common Mode Rejection: 45.0 dB minimum
Preamplifier Output Clipping Level (1% THD): -6.0 dBV (0.5 V), -12 dBV at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements:
- Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
- Relative Humidity: 0 to 95%
Sensitivity (At 1,000 Hz, open circuit voltage*)
- Cardioid: -35.0 dBV/Pa (17.8 mV)
All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
- Cardioid: 124.2 dB
All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)
- Cardioid: 28.0 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
- Cardioid: 66.0 dB
Dynamic Range at 1 k ohm load
- 96.2 dB
- 100 dB at 0 gain
Common Mode Rejection: 45.0 dB minimum
Preamplifier Output Clipping Level (1% THD): -6.0 dBV (0.5 V), -12 dBV at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements:
- Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
- Relative Humidity: 0 to 95%
Dimensions and Weight in Packaging
Black, In-Line Preamp with 3-pin XLR Output, MX202B/N, No Capsule
- Shipping Weight: 0.8 lbs
- Shipping Dimensions: 10 x 7 x 3 in
- Manufacturer Part Number (MPN): MX202B/N
Open Box (Like New), Black, In-Line Preamp with 3-pin XLR Output, MX202B/N, No Capsule
- Shipping Weight: 0.8 lbs
- Shipping Dimensions: 10 x 7 x 3 in
- Manufacturer Part Number (MPN): MX202B/N
Black, Plate-Mount Preamp with Screw Terminals, MX202BP/N, No Capsule
- Shipping Weight: 0.79 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202BP/N
White, In-Line Preamp with 3-pin XLR Output, MX202W-A/N, No Capsule
- Shipping Weight: 0.8 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202W-A/N
Open Box (Like New), White, In-Line Preamp with 3-pin XLR Output, MX202W-A/N, No Capsule
- Shipping Weight: 0.8 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202W-A/N
White, Plate-Mount Preamp with Screw Terminals, MX202WP-A/N, No Capsule
- Shipping Weight: 0.79 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202WP-A/N
Black, In-Line Preamp with 3-pin XLR Output, MX202B/C, Cardioid
- Shipping Weight: 1 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202B/C
Black, In-Line Preamp with 3-pin XLR Output, MX202B/S, Supercardioid
- Shipping Weight: 0.82 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202B/S
Black, Plate-Mount Preamp with Screw Terminals, MX202BP/C, Cardioid
- Shipping Weight: 0.78 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202BP/C
Black, Plate-Mount Preamp with Screw Terminals, MX202BP/S, Supercardioid
- Shipping Weight: 0.79 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202BP/S
White, In-Line Preamp with 3-pin XLR Output, MX202W-A/C, Cardioid
- Shipping Weight: 0.81 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202W-A/C
White, In-Line Preamp with 3-pin XLR Output, MX202W-A/S, Supercardioid
- Shipping Weight: 0.8 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202W-A/S
White, Plate-Mount Preamp with Screw Terminals, MX202WP-A/C, Cardioid
- Shipping Weight: 0.78 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202WP-A/C
Open Box (Like New), White, Plate-Mount Preamp with Screw Terminals, MX202WP-A/C, Cardioid
- Shipping Weight: 0.78 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202WP-A/C
White, Plate-Mount Preamp with Screw Terminals, MX202WP-A/S, Supercardioid
- Shipping Weight: 0.78 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202WP-A/S
Black, In-Line Preamp with 3-pin XLR Output, MX202B/MS, Mini shotgun
- Shipping Weight: 0.81 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202B/MS
Black, Plate-Mount Preamp with Screw Terminals, MX202BP/MS, Mini shotgun
- Shipping Weight: 0.79 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202BP/MS
Open Box (Like New), Black, Plate-Mount Preamp with Screw Terminals, MX202BP/MS, Mini shotgun
- Shipping Weight: 0.79 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202BP/MS
White, In-Line Preamp with 3-pin XLR Output, MX202W-A/MS, Mini shotgun
- Shipping Weight: 0.82 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202W-A/MS
White, Plate-Mount Preamp with Screw Terminals, MX202WP-A/MS, Mini shotgun
- Shipping Weight: 0.8 lbs
- Shipping Dimensions: 10 x 5 x 3 in
- Manufacturer Part Number (MPN): MX202WP-A/MS
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com
Phone: 800-516-2525
Email: service@shure.com
Black, In-Line Preamp with 3-pin XLR Output, MX202B/N, No Capsule
$188.00
FREE
-Day
Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.