Shure GLXD24R/B58 Wireless Handheld Microphone System

No longer available at zZounds
Part of Shure's GLX-D digital wireless family, this set includes a GLXD4R rackmount receiver, and Beta58A handheld mic with rechargeable lithium-ion battery.

The Shure GLXD24R/B58 Wireless Handheld Microphone System is part of the GLX-D Advanced wireless systems family. The Shure GLXD24R/B58 provides intelligent battery rechargeability, robust RF performance, automatic frequency management and increased channel count with exceptional digital audio clarity and seamless operation. The precision-engineered Shure BETA 58A vocal microphone capsule is optimized for lead vocal performance.

Included with Shure GLXD24R/B58 System

- Shure GLXD2/BETA58 handheld transmitter with integrated BETA 58A super-cardioid dynamic microphone capsule
- GLXD4R rack mount receiver
- Microphone clip
- SB902A Rechargeable lithium-ion battery
- USB Charge cable
- 2 Detachable antennas
- Rack mount hardware
- User guide

- Compatibility: Operate up to 9 compatible systems in typical setting, up to 11 maximum under ideal conditions
- System Operating Range:
- - Indoors: Up to 100 feet (30 m) typical, with a maximum of 200 feet (60 m) under ideal conditions
- - Outdoors: Up to 65 feet (20 m) typical, with a maximum of 165 feet (50 m) under ideal conditions
- Transmit Mode: Shure Proprietary Digital
- Audio Frequency Response: 20 Hz - 20 kHz Note: Dependent on microphone type
- Dynamic Range: 120 dB, A-weighted
- - Latency Groups 1 and A: 40 ms
- - Groups 2, 3, 4 and B: 73 ms
- RF Sensitivity: -88 dBm, typical
- Total Harmonic Distortion: 02%, typical
- RF Output Power: 10 mW EIRP max
- Operating Temperature Range: -18 degrees C (0 degrees F) to 57 degrees C (135 degrees F) Note: Battery characteristics may limit this range
- Storage Temperature Range: -29 degrees C (-20 degrees F) to 74 degrees C (165 degrees F)
- Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output
- Shure SB902A battery life: Up to 11.5 hours
- NOTE: All Specifications are subject to change. Performance may vary depending on country regulations and operating environment.

GLXD4R Rack Mount Receiver
- Dimensions 42 x 197 x 163 mm (17 x 78 x 64 in) H x W x D
- Weight: 9072 g (32 oz) without batteries
- Housing: Steel
- Power Requirements: 14 to 18 VDC (tip positive with respect to ring), 550 mA
- Spurious Rejection: >35 dB, typical
- Gain Adjustment Range: -18 to 42 dB in 1 dB steps
- Phantom Power Protection: Yes
- Audio Output:
- - Configuration XLR Output Balanced: 635 mm (1/4") output Impedance balanced
- - Impedance XLR Output 100 O: 635 mm (1/4") output 100 O (50 O, Unbalanced)
- - Full-Scale Output XLR LINE setting= +18 dBV, MIC setting= -12 dBV: 635 mm (1/4") +12 dBV
- - Pin Assignments: XLR Output 1=ground, 2=hot, 3=cold; 635 mm (1/4") connector Tip=audio, Ring=no audio, Sleeve=ground
- Mic/Line Switch: 30 dB Pad
- Receiver: Antenna Input
- Impedance: 50 O
- Antenna: Type 1/2 Wave Sleeve Dipole
- Maximum Input Level: -20 dBm

GLXD2 Handheld Transmitter
- Dimensions: BETA 58 51 mm, 20 in 252 mm, 99 in 37 mm, 15 in
- Weight: BETA 58 221 g (78 oz) without batteries
- Housing: Molded Plastic
- Power Requirements: 37 V Rechargeable Li-Ion
- RF Output Power: 10 mW EIRP max
- Maximum Input Level: 145 dB SPL

For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com