Shure GLXD14R/B98 Digital Wireless Beta 98H/C Instrument Microphone System

No longer available at zZounds
Clip the Beta98H/C gooseneck microphone to a horn bell or drum rim, pocket the GLXD1 transmitter, and go wireless! Shure SB902 rechargeable battery included.

The Shure GLXD14R/B98 Wireless Instrument Microphone System is part of the GLX-D Advanced wireless systems family. The Shure GLXD14R/B98 provides intelligent rechargeability, robust RF performance, automatic frequency management and increased channel count with exceptional digital audio clarity and seamless operation. The precision-crafted BETA 98H/C gooseneck microphone offers flexible positioning for brass, woodwind and percussion applications. For use with GLX-D Advanced Frequency Managers (UA846Z2).

Included with Shure GLXD14R/B98 System

- GLXD4R rack mount receiver
- GLXD1 bodypack transmitter
- BETA 98H/C cardioid condenser microphone
- SB902A rechargeable lithium-ion battery
- USB charge cable
- 2-detachable antennas
- Rack mount hardware
- User guide

- Compatibility: Operate up to 9 compatible systems in typical setting, up to 11 maximum under ideal conditions

- System Operating Range:
-- Indoors: Up to 100 feet (30 m) typical, with a maximum of 200 feet (60 m) under ideal conditions
-- Outdoors: Up to 65 feet (20 m) typical, with a maximum of 165 feet (50 m) under ideal conditions
- Transmit Mode: Shure Proprietary Digital
- Audio Frequency Response: 20 Hz - 20 kHz Note: Dependent on microphone type
- Dynamic Range: 120 dB, A-weighted
-- Latency Groups 1 and A: 40 ms
-- Groups 2, 3, 4 and B: 73 ms
- RF Sensitivity: -88 dBm, typical
- Total Harmonic Distortion: 02%, typical
- RF Output Power: 10 mW EIRP max
- Operating Temperature Range: -18 degrees C (0 degrees F) to 57 degrees C (135 degrees F) Note: Battery characteristics may limit this range
- Storage Temperature Range: -29 degrees C (-20 degrees F) to 74 degrees C (165 degrees F)
- Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output
- Shure SB902A battery Life: Up to 11.5 hours
- NOTE: All Specifications are subject to change Performance may vary depending on country regulations and operating environment

GLXD4R Rack Mount Receiver
- Dimensions 42 x 197 x 163 mm (17 x 78 x 64 in) H x W x D
- Weight: 9072 g (32 oz) without batteries
- Housing: Steel
- Power Requirements: 14 to 18 VDC (tip positive with respect to ring), 550 mA
- Spurious Rejection: >35 dB, typical
- Gain Adjustment Range: -18 to 42 dB in 1 dB steps
- Phantom Power Protection: Yes
- Audio Output:
-- Configuration XLR Output Balanced: 635 mm (1/4") output Impedance balanced
-- Impedance XLR Output 100 O: 635 mm (1/4") output 100 O (50 O, Unbalanced)
-- Full-Scale Output XLR LINE setting= +18 dBV, MIC setting= -12 dBV: 635 mm (1/4") +12 dBV
-- Pin Assignments: XLR Output 1=ground, 2=hot, 3=cold; 635 mm (1/4") connector Tip=audio, Ring=no audio, Sleeve=ground
- Mic/Line Switch: 30 dB Pad
- Receiver: Antenna Input
- Impedance: 50 O
- Antenna: Type 1/2 Wave Sleeve Dipole
- Maximum Input Level: -20 dBm

GLXD1 Bodypack Transmitter
- Dimensions: 904 x 645 x 229 mm (356 x 254 x 090 in), H x W x D (without antenna)
- Power Requirements: 37 V Rechargeable Li-Ion
- Housing: Cast Metal, Black Powdercoat
- Input Impedance: 900 kO
- RF Output Power: 10 mW EIRP max
- Transmitter: Input
- Connector: 4-Pin male mini connector (TA4M)
- Configuration: Unbalanced
- Maximum Input Level: (1 kHz at 1% THD) -84 dBV (75 Vp-p)
- Antenna Type: Internal Monopole
- Pin Assignments: TA4M
-- 1: Ground (cable shield)
-- 2: + 5 V Bias
-- 3: Audio
-- 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)

For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com