Rolls WR61 Add-On Belt Pack Receiver for WPM61
No longer available at zZounds
zZounds Gear Experts Say...
This receiver has a volume control/on-off switch, and a 9 volt battery compartment on the back.
Overview
This receiver has a volume control/on-off switch, and a 9 volt battery compartment on the back.
Specs
Specifications
Sensitivity: 2.5 µV min (under squelch control)
Max. Power: 20mW min (at 16 Ohm speaker load)
Distortion: 3% max (under 10mW output)
Frequency Stability: +/-0.01% ppm (under 25 degrees C)
Hum and Noise: - 50dB min
Power Source: 9V DC (alkaline recommended)
Current Consumption: DC 20mA max
Dimension: 60x25x100 mm
Sensitivity: 2.5 µV min (under squelch control)
Max. Power: 20mW min (at 16 Ohm speaker load)
Distortion: 3% max (under 10mW output)
Frequency Stability: +/-0.01% ppm (under 25 degrees C)
Hum and Noise: - 50dB min
Power Source: 9V DC (alkaline recommended)
Current Consumption: DC 20mA max
Dimension: 60x25x100 mm
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
Electro-Voice EVERSE 8 Battery-Powered PA Speaker
$799.00
- 12 payments of$66.58/mo
- No Credit Check6 payments of$133.17/mo
-
Shure SLXD2+/SM58 Handheld Digital Wireless Transmitter with SM58 Microphone Capsule
$349.00
- 8 payments of$43.63/mo
- No Credit Check6 payments of$58.17/mo
-
Audio-Technica AT829cW Cardioid Condenser Lavalier (Microphone Only)
$79.00
- No Credit Check4 payments of$19.75/mo
-
