Affordable and Durable Stage Monitors -- With Tons of HeadroomAdd stage monitors to your PA rig without breaking the bank with Peavey's affordable PV 15M floor monitor. Handling 500 watts program and a whopping 1000 watts peak, these wedges have the oomph to easily slice through your stage volume. The classic trapezoidal shape sits sturdily at a 30- or 45-degree angle from the floor, depending on which side you rest it on -- so you can angle your PV 15Ms exactly as the drummer, keyboardist or singer needs them. And as an added bonus, the PV 15M monitors have a built-in bracket for pole-mounting. That means that you can add two speaker stands and a power amp, and instantly turn two floor monitors into a main PA system.
Sturdy, Simple DesignPeavey is known for the tough, road-worthy products in their long-running PV series, and the 15M floor monitors are no exception. Peavey PV 15M floor monitors employ a simple, low-profile design. Behind the heavy-duty steel grille, you'll find Peavey's two-way speaker system: a 15-inch Sheffield Pro woofer and a 14XT titanium-diaphragm driver with a 90-degree by 40-degree constant-directivity horn. The carpet-covered box has a sturdy steel handle for easy transport, and on the other end, you'll find the 1 3/8" pole-mounting bracket and dual parallel 1/4" input jacks. Two input jacks mean you can plug in your 1/4" speaker cable to one monitor, and plug in a second 1/4" speaker cable to a second monitor. After all, at this price, you'll want to pick up at least two PV 15Ms.
Sound Guard for Overload ProtectionRemember, when you set up two 8-ohm loudspeakers in parallel, you're effectively reducing the speakers' resistance to 4 ohms. The PV 15Ms have a nominal impedance (or resistance) of 8 ohms, so simply divide 8 by the number of PV 15Ms you're running in parallel. Reducing resistance by daisy-chaining your monitors increases power to the monitors: picture the signal coming out of your power amp and into your monitors as traffic traveling down a highway that's now twice as wide. Increasing power can result in speaker overload. That's why Peavey's exclusive Sound Guard IV provides overload and overdrive protection for your horn driver. So go ahead -- daisy-chain a second PV 15M to cover a wider area with the same monitor mix. Sound Guard means fewer blown drivers for monitors that last.
Floor Monitors that Double as Main PA SpeakersWith 500 watts program power (also known as continuous power, or RMS) and 1000 watts peak -- and a maximum SPL of 127 dB -- these Peavey PV 15M speakers are powerful enough to be more than just floor monitors. In fact, a pair of 15Ms make a fantastic main PA for those impromptu house party gigs. If your band needs a pair of monitors for your practice space, but you also want a portable PA so you can host a battle-of-the-bands at your drummer's barbecue, the Peavey PV 15M is a perfect choice. These speakers have a standard 1 3/8" pole-mount cup for mounting on speaker trees. Add a pair of tripod speaker stands to elevate your PV 15Ms above the crowd for the whole backyard to hear.
Just Add a Power AmplifierThe Peavey PV 15M floor monitors are compact and lightweight because they're passive speakers. That means they don't require power cables, but they do require a speaker-level input from your power amp or powered mixer. When matching speakers to power amps, the rule of thumb is to use an amp that can deliver twice the wattage of the speaker's continuous (program) power rating. Peavey makes it easy for you: the PV 15Ms are rated at 500 watts continuous power at 8 ohms, so to get the most out of your monitors, match them to an amp that can deliver 1000 watts per channel into an 8-ohm load. If you've already got a power amp or powered mixer, PV 15M floor monitors are a perfect choice to complete your system.
Features:- Rugged floor monitor with carpet covering, steel handle and grille
- 500 watts program, 1000 watts peak power handling
- Two-way speaker: 15" Sheffield Pro 1500+ woofer, and 14XT compression horn driver
- Peavey Sound Guard IV high-frequency driver protection
- Two 1/4" full-range parallel jacks for daisy-chaining
- Standard 1 3/8" aluminum pole mount cup
Quality floor monitor wedges aren't a luxury -- they're a must-have for delivering a solid stage performance. Luckily, the PV 15M floor monitors have the power you need to cut through the stage and hear the whole band. Add monitor wedges to your practice space or live PA rig with the Peavey PV 15M floor monitors.
Note: Unpowered speaker, requires separate power amplifier.
zZounds is an authorized dealer of Peavey products.
Pole Socket Size: 1-3/8" (35 mm)
Dimensions: 24.75 in. W x 16.25 in. H x 12.5 in. D (Unpacked), 26.375 in. W x 19.375 in. H x 14.25 in. D (Packed)
Weight: 45 lbs. (Packed), 39 lbs. (Unpacked)
- Weight, Dimensions, and Manufacturer Part Numbers
- Base Item
Manufacturer Part Number (MPN):
If you have additional warranty questions, please contact the manufacturer at 877-732-8391
Peavey PV15M Floor MonitorHear the whole band with astonishing clarity and punch! The PV 15M is a two-way system with a 15-inch Sheffield Pro 1500+ premium woofer and a 14XT 1.4-inch titanium-diaphragm compression driver (no piezos) coupled to a constant-directivity horn with Sound Guard IV high-frequency driver protection. It is rated at 500 watts program and 1,000 watts peak power handling capability. This rugged trapezoidal enclosure can be angled at either 30 or 45 degrees from the floor in addition to being pole mounted. Two 1/4-inch, full-range parallel inputs allow easy daisy chaining.
Features- Two-way floor monitor
- 500 W program power handling
- 68 Hz to 17 kHz
- 15 in. Sheffield Pro 1500+ woofer w/ 2.5 in. voice coil
- 14XT compression driver w/ titanium diaphragm, 1 in. exit
- 90 x 40 CD horn
- Sound Guard IV tweeter protection
- Carpet covering
- Steel handle
- Heavy duty metal grille
- Die-cast aluminum pole mount
Note: Unpowered speaker, requires separate power amplifier.