Origin Effects Cali76 Stacked Edition Compressor Pedal

Origin Effects Cali76 Stacked Edition Compressor Pedal

Simple to use, the gold "Thru" control of this Cali76 Stacked Edition allows for not only single- and dual-stage Origin sounds -- but everything in between.

Origin Effects Cali76-TX Reissue FET Compressor Pedal

No longer available at zZounds
Experience the 76! The Origin Effects Cali76-TX FET compressor boasts a custom-wound iron core transformer optimized for guitar, bass and studio use.
This is a reissue of the original, large-format Cali76 compressor with high-spec transformer output stage and balanced line out, optimised for guitar, bass and studio use, in a strictly limited run of 200 units for the TX model.

When Origin launched the Cali76 back in 2012, it was, and still is, like nothing else on the market. With its large, brushed aluminium enclosure, studio-grade circuitry and astonishingly transparent sound, the Cali76 broke the mould in every department.

The Cali76-TX features a custom-wound iron core transformer designed to subtly saturate and add extra harmonic complexity at higher gain levels.

The pedal also features a 12-stage LED gain reduction meter, a balanced line-level/DI output, and a high/low gain switch -- useful for pushing the transformer harder.

Features:

- 100% Class-A discrete signal path
- Ultra fast "FET" response
- Attack & Release controls
- Studio-grade "discrete" preamplifier
- Rugged VU-style meter
- Low noise electronics
- Class-A discrete output-amplifier driving transformer
- Dual, low-impedance outputs (via audio transformer)
- Unbalanced instrument-level output
- Balanced Line-DI output (Please note that output signal level does not conform to the +4dBm professional studio convention, and so some additional amplification may be required.)
- Ground-lift function to eliminate ground induced hum
- Gain-switch adjusts transformer saturation
- Auto-Shutdown - preserves battery operation
- PSU Spec. Min: 13mA @ 9V read more / 72mA @ 18V (PSU not included)
- Suggested PSU Rating: 200mA for optimum start-up
- Designed and built in England
read less
- Controls:
- OUTPUT: overall output level
- INPUT/COMP: sets how much signal passes the threshold and is compressed
- RATIO: sets the amount of attenuation from anywhere between 4:1 and 20:1
- ATTACK: determines the time taken for the compressor to react to the presence of a signal
- RELEASE: sets the duration of gain reduction before recovering to no compression
- GAIN: pushes the transformer into saturated overdrive
- PAD: drops the signal from LINE/DI output by around 28dB
- GND: disconnects the ground connection to solve ground-loop-related issues